Jump to content
SAU Community

Gt-r Gearboxes (2), Exedy Twin Plate Clutch

JAGR33
 Share

Recommended Posts

JAGR33 Grand Master

JAGR33

Posted
Posted

I have 3 items for sale:

1. R33 GTR Series 3 gearbox, has stronger synchros than series 1&2, has been pulled apart, checked by professional gearbox rebuilder, in 'as new' condition. This has been converted to accomodate for a push type clutch, but can be changed back to pull type. Please specify when purchasing. It also has fresh redline oil (not cheap) and has done 500kms.

Price $1900 ono

2. R32 GTR gearbox has been pulled apart inspected and had new bearings installed, in excellent condition. Has no oil and has not been installed in car since pulled apart.

Price $1650 ono

Note: Both gearboxes have transfer cases attached and can be inspected/picked up from Racepace Motorsport in Bayswatrer (Melb).

3. Exedy twin plate clutch (push type) to suit R32 GTR or R33 GTR gearbox that has been converted to push type, in very good condition has plenty of life still in it. This clutch supported 350rwkw reliably for the last 2 years and has never slipped. I'd say it has done about 5-6000 kms with no 'hard launches'.

Price $1100 ono

Post here or PM if interested.

Can ship interstate at buyers expense.

Cheers,

Jack

  • 2 weeks later...
Marko R1 Grand Master

Marko R1

Posted
Posted
Price for series 3 box without transfer?

My 4th syncho is f**ked...

my gearbox in my previous gtr was the same - 4th gear over 100km/h was torture!

i then tried redline...it NEVER crunched again regardless of speed i was changing at (200km/h +)

trust me it works :( just try it for $100!

(sorry to hijack thread)

DOLUCK_GTR Newbie

DOLUCK_GTR

Posted
Posted
I have 3 items for sale:

1. R33 GTR Series 3 gearbox, has stronger synchros than series 1&2, has been pulled apart, checked by professional gearbox rebuilder, in 'as new' condition. This has been converted to accomodate for a push type clutch, but can be changed back to pull type. Please specify when purchasing. It also has fresh redline oil (not cheap) and has done 500kms.

Price $1900 ono

2. R32 GTR gearbox has been pulled apart inspected and had new bearings installed, in excellent condition. Has no oil and has not been installed in car since pulled apart.

Price $1650 ono

Note: Both gearboxes have transfer cases attached and can be inspected/picked up from Racepace Motorsport in Bayswatrer (Melb).

3. Exedy twin plate clutch (push type) to suit R32 GTR or R33 GTR gearbox that has been converted to push type, in very good condition has plenty of life still in it. This clutch supported 350rwkw reliably for the last 2 years and has never slipped. I'd say it has done about 5-6000 kms with no 'hard launches'.

Price $1100 ono

Post here or PM if interested.

Can ship interstate at buyers expense.

Cheers,

Jack

Do you still have R33 Gtr Gearbox for sale?

  • 2 months later...
wraith_skyline Proficient

wraith_skyline

Posted
Posted

May be interested in the 33 gearbox if you still have it, mine has just jagged in and depending on how bad it might be cheaper to get yours

farch Collaborator

farch

Posted
Posted

GTRsean's gbox alone was $1975 to rebuild with new synchros and bearings, after buying it second hand for $700.

These gearboxes are a bargain guys!!!!!!seriously, no more crunching!!

JAGR33 Grand Master

JAGR33

Posted
  • Author
Posted
GTRsean's gbox alone was $1975 to rebuild with new synchros and bearings, after buying it second hand for $700.

These gearboxes are a bargain guys!!!!!!seriously, no more crunching!!

Cheers Joshua!!! :)

The gearboxes were priced to sell hence why I wasn't asking for ridiculous pricing considering the work that's been done to them..

As you can see, I haven't been bumping the thread every day so I'm not desperate to get rid of them either.

If I don't get the price I'm after they can sit at Racepace for ever.

In saying that the 33 box has been sold pending payment, and the clutch has also been sold.

So the 32 box remains..

Cheers

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...