Jump to content
SAU Community

Recommended Posts

Thanks for all the great replies.

I've personally not seen Water temp issues anywhere near as bad as mine while driving other R34's and other GTR's on the track, so I was suspecting there was a more fundamental issue with my car, such as a head gasket leak.

It sounds like a good idea to get the coolant checked to see if there's any combustion gases in it, so I'll enquire into getting that done.

The big aftermarket IC was on the car when I got it, but I have the original one so can arrange to get it put back on.

I'm definitely happy to install an Oil Cooler, I just wanted to make sure everything is working correctly.

Thanks for all the great replies.

I've personally not seen Water temp issues anywhere near as bad as mine while driving other R34's and other GTR's on the track, so I was suspecting there was a more fundamental issue with my car, such as a head gasket leak.

It sounds like a good idea to get the coolant checked to see if there's any combustion gases in it, so I'll enquire into getting that done.

The big aftermarket IC was on the car when I got it, but I have the original one so can arrange to get it put back on.

I'm definitely happy to install an Oil Cooler, I just wanted to make sure everything is working correctly.

A few simple, checks take 10 minutes;

Do you have to fill the radiator up with water often?

Is there rust on the spark plugs?

Are their bubbles appearing in the radiator header tank at idle?

Is there water in the oil?

Is there oil in the water?

If the answer is no to all of the above, then I doubt it's a head gasket.

Cheers

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...