Jump to content
SAU Community

Recommended Posts

Item: Poker Table

Age: 12 Months

Condition: Excellent Condition

Price: $250 or Trade for a Nintendo Wii

Location: Sydney, Hornsby

Contact: Post or via Pm

Comments:

Got a poker table that doesn't get much use, SO im going to let it go it seats 10 people and come with its own stands.

table1.jpg

table2.jpg

Edited by Geoff897
Link to comment
https://www.sau.com.au/forums/topic/199641-poker-table-seats-10-people/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
hey wat are the dimensions?

just need to know if its giong to fit in the games room + can you post a pic of the bottom half??

Thanx

Here is a photo of the bottom.

Diamensions i will need to get them when im home.

http://www.members.optusnet.com.au/jazzygeoff/bottom.jpg

  • 2 months later...
  • 4 weeks later...

Dimensions are 205cm by 110 about 5cm thick.

The legs do pull apart if needed. I brought it home in a little suzuki hatch with the back seats down tho that was pushing it. I might be arrange a mate to deliver in sydney for a small cost depending where to.

PM Sent.

Lol Sorry i couldnt be their, I didnt beleive my mate either untill we tried, was up and over the front headrests with back seat down.

Glad you got it home alright, and it didnt rain. Have fun with it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...