Jump to content
SAU Community

Recommended Posts

hey all i have an r34 gt (n/a) and my front shock absorbers are totally rooted right now.

what i wanted to know was will it be ok to drive the car still and just be extra careful going over bumps etc???

it started off with the front being quite jumpy going over bumps etc, and now its the worst ride :(

any recommedations for new shocks

??

i cant afford coilovers either! but i do currently have lowered king springs in the car.

Link to comment
https://www.sau.com.au/forums/topic/199768-my-shock-absorbers-are-stuffed/
Share on other sites

kyb shocks are great value for money bilsteins are fantastic but think about what ya use ya car for ?

if it never see'e the track kybs will be fine . if ya think ya going to do track work then get something better .

most people cant tell if they have working shocks let alone a stuffed one we see this all the time in the workshop where i work.

why spend a shitload of money if ya not really going to get the full benifet from it .

ps if ya need the part numbers for kyb let me know i will look it up at work for ya .i just got a complete set for my sons r33

Edited by mid life crisis
kyb shocks are great value for money bilsteins are fantastic but think about what ya use ya car for ?

if it never see'e the track kybs will be fine . if ya think ya going to do track work then get something better .

most people cant tell if they have working shocks let alone a stuffed one we see this all the time in the workshop where i work.

why spend a shitload of money if ya not really going to get the full benifet from it .

ps if ya need the part numbers for kyb let me know i will look it up at work for ya .i just got a complete set for my sons r33

true in a sense. But i see it every parts that we buy for the car i see it as an investment in the long term. Blisteins can be rebuilt though. All these years i have known blisteins shocks are one of the best money can buy. But like you said it cost a bit more expensive then the other shocks. But if you can rebuilt it then in the long term its cheaper than most other brands.

An example about 60k kms ago my landcruiser 100 series was in need of shock absobers. Did a little bit of homework and i talked to one of my company spare parts suppliers about it. From memory the cost difference of each shock was about A$100 compared between the original toyota and blistein shocks. And i made a decision to go for blistein in like 2 seconds. Why? Blistein can be rebuilt. So in a sense in the long term its going to be cheaper than running the original toyota shocks. And after installing the blistein shocks on the landcruiser, man the difference in the ride and handling is major. To rebuilt the blistien shocks from memory is A$60/shocks.

So its up to you which to choose of course. But i think if you have the extra cash just get a blistein and it will pay for itself in the long run. Why pay for a set of shocks when its worn and you have to throw it away. But of course theres a limitation on the rbuilt thoug. Like the clydrical can have any dents or not or the shafts can have any nick on it. If they do they are not worth rebuilding cos its going to cost too much. By the way konis can be rebuilt too.

just my 2c worth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...