Jump to content
SAU Community

Recommended Posts

R32 gtst - RB20 if it makes a difference,

driving along noticed a funny smell like oil or something then all of a sudden stopped at lights i hear it start pissing out, lucky i was near home so just made it back before the engine temp was cooked lol. went to top it up today and it drank about 4 - 5 litres and still wanted more, turned it on to see where its coming from and i cant see the point of origin but its dripping down and coming off the bottom of the gearbox, right under the clutch. dunno what around there would leak cos theyre are no pipes are there ?? anyway i was gunna take it in for its due service in the next few days anyway but now i dunno if its safe to drive it there or if i should get it towed ?

will try get some pics up ASAP, cheers

Link to comment
https://www.sau.com.au/forums/topic/199882-coolant-leak-where-from/
Share on other sites

I think its what they called a Wels Plug,

It sit in the back of the block, designed to expand when too much heat or something like that. Best to tow it to a mechanic and have it replace.

WELSH plug.

They are there to fill up the hole left for expansion when the block (and sometimes head) is cast. Pretty rare for these to go if you are looking after the cooling system. I would go with the general consensus and chase heater hoses first.

is it holding coolant ? if it just all goes down you have kinda a big problem, if it slow leak pressure test it ( iff posible ) will be easy to find out where its leaking from ,

wash whole leaking areas down dry take small drive see if it leaks , take from there

and all the checks other's have mentioned

hope ya find problem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...