Jump to content
SAU Community

Recommended Posts

it ran 1.46bar no problem at all

im making bout 14psi by 4000rpm then bout 20psi by 5000rpm and yeah

its really weird power band, needs a tune still since plenum upgrade so i dunno

tune should bring it on alot better id say.

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

it ran 1.46bar no problem at all

im making bout 14psi by 4000rpm then bout 20psi by 5000rpm and yeah

its really weird power band, needs a tune still since plenum upgrade so i dunno

tune should bring it on alot better id say.

mine is doing the same thing but i havn't driven it up t0 20psi. it just dont seem right i back off when the boost is around 18 psi, seeing as your motor hasnt blown yet i might flat stick it tongiht see what boost it will run and how it runs.

Not before the finish line :D

The other car will have the beers open an waiting for you, while you wait for boost :domokun:

lol.. i was told that the turbo will free up after a month or so of driving and turbo will spool up alot quicker say around 2500rpm :P

lol.. i was told that the turbo will free up after a month or so of driving and turbo will spool up alot quicker say around 2500rpm :P

:lol: Whoever told you that is full of crap. Sorry to say, you have been had, if you are expecting that to happen.

For the amount of boost you use (stress on the engine) and the power/response it makes, the turbo is just not worth it. :thumbsup:

yeah you dif wont be gettin that kind of response no way lol

im just waiting 1 day for mine 2 shit itself lol one day, but it was re ringed bout 12months ago and done 20,000kms since then.... on 19psi pretty much daily

has vapour blow by but no oil, but wot motor doesnt have blow bye? lol

:lol: Whoever told you that is full of crap. Sorry to say, you have been had, if you are expecting that to happen.

For the amount of boost you use (stress on the engine) and the power/response it makes, the turbo is just not worth it. :O

hahah ok. but stop getting excited about a stock car that sucks balls to no i might have problem disposing of them! i got this turbo free so who cars :P

yeah you dif wont be gettin that kind of response no way lol

im just waiting 1 day for mine 2 shit itself lol one day, but it was re ringed bout 12months ago and done 20,000kms since then.... on 19psi pretty much daily

has vapour blow by but no oil, but wot motor doesnt have blow bye? lol

mine has just been re ringed aswell mate, who does your tuning and wat computer you running??

its actually caused by the exhaust housing/wastegate design. if u look at where the wastegate gases come out you'll see it hits a wall and has to turn 90 degrees to join the main flow out the turbine. this causes way too much backpressure so gas would not flow out the wastegate just the turbine. hence the rising boost. seen it happen with many of these cheap integral wastegate turbos.

yeah you dif wont be gettin that kind of response no way lol

im just waiting 1 day for mine 2 shit itself lol one day, but it was re ringed bout 12months ago and done 20,000kms since then.... on 19psi pretty much daily

has vapour blow by but no oil, but wot motor doesnt have blow bye? lol

Hey mate, I just blew up a kkr480! On 20 psi, Now running a 560 and its overboosting also. Its hitting 23-24 pounds which is ridiculous! Not sure what to do either? Needs a re tune, im using a blitz electronic boost controller and when i turn it down it still goes way past the set 20 psi... It sucks!

Good luck keep me posted on what you do...very interesting!

Thanks Joey

-ex hpi 4door r32.

"its actually caused by the exhaust housing/wastegate design. if u look at where the wastegate gases come out you'll see it hits a wall and has to turn 90 degrees to join the main flow out the turbine. this causes way too much backpressure so gas would not flow out the wastegate just the turbine. hence the rising boost. seen it happen with many of these cheap integral wastegate turbos."

need a external wastegate might help other option bin it the money you have now spent on kkr rubbish you would have had a good turbo

Edited by rich flavour
correct me if im wrong lowrb but ur engine blew up a lil while back and u live in bundaberg right

yes i cracked 4 piston ring lands bout 12 months ago, running a slide highflow 18psi and stock ecu lol

but since re ringed motor and done nearly 20,000kms on 19-20psi daily... mmmm lol hit 1.5 bar last nite prob blow soon haha

motor loves it lol

yes i cracked 4 piston ring lands bout 12 months ago, running a slide highflow 18psi and stock ecu lol

but since re ringed motor and done nearly 20,000kms on 19-20psi daily... mmmm lol hit 1.5 bar last nite prob blow soon haha

motor loves it lol

remember me sbr33 from the bay lol

i guess there is only so much power stock turbo will push out, kkr430 or 480 will push more power then a factory turbo anytime or day so i dunno wats the go with the lies? lol

Lies that a car with no respsonse (only mildy more power) will beat a car with not too far off power and a wide powerband

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
    • Did you pick up a manual cluster to remove the position indicator?  (Pretty sure the 34 has the gear position in the cluster, but it's been a while)
    • Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • 440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
×
×
  • Create New...