Jump to content
SAU Community

Do R32 Gtr Rotor Fit On R33 Gts-t

humz
 Share

Recommended Posts

Ronin 09 Grand Master

Ronin 09

Posted
Posted

I've got a set of rotors and two piston GTR32 calipers for the rear if you're interested?

I think a lot of the 180sx and Silvia guys do the twin piston caliper rear upgrade on them... don't know about the 4 stud to 5 stud though...

humz Proficient

humz

Posted
  • Author
Posted
you duncan are a legend

thanks

what about rda s13 5stud rear hubs on r33 gts

the rotors on my r33 are fine but i do want to upgrade to slotted ones.

found some relatively cheapies but they are as described above so hence

why i started this topic.

anyone got some cheap slotted rotors f/s??

anyone know answer to that above question???

adam-__- Grand Master

adam-__-

Posted
Posted

Putting 5 stud hubs from an S13 to the R33 shouldn't be a problem as far as I know. When S13's go to 5 stud, they use R33 hubs without a problem, so going the other way around... I don't see why not.

J'z-R33 Grand Master

J'z-R33

Posted
Posted
the rotors on my r33 are fine but i do want to upgrade to slotted ones.

found some relatively cheapies but they are as described above so hence

why i started this topic.

anyone got some cheap slotted rotors f/s??

anyone know answer to that above question???

Yep, I will have a full set of slotted discs shortly been on the car for about 10k. Im in Sydney PM me if keen

Cheers,

Johno

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...