Jump to content
SAU Community

Recommended Posts

Bah, V8 supercars are cool, but they are about as much Holden commodore V8 or Ford falcon V8 as my skyline... they both run american engines anyway, and apart from the body shell about 0% are aussie based. Oh and i believe we have created another Ford/Holden abuse thread :rolleyes:

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Ok, after clocking up over 200km in one, i will go on the record as saying the Falcon XR6Turbo is the only car that will make me trade both my cars, and a mate is even - shock- thinking of putting the R32 GT-R in the garage for "weekend-only" use and buying a Falc Turbo to drive daily.

I've had the chance to run one against all other Falcoden performance models and it's the best (better than XR8 or GTS 300 Coupe)

That's my opinion which counts for 3/8 of stuff all though...

ooops that's 2000km i've done...

You know that JUN in Japan have bought one to modify? And an XR8 and 6T have exactly the same rear-wheel kW figures?

If you pop the bonnet and remove the top 1/2 of the air box on one when it's on the dyno you liberate 30kW. Spend $2000 with APS and you get 309kW @ flywheel as well... There is a rumour the proposed GT-HO will have a 6cyl version as well... Ford saw over 450kW in the "hard-tuned", stock bottom-end mules...

Ive driven one.. I must say it did not feel very powerfull at all.

But its much better then any holden ive driven. they feel like cheap rubbish. Like something you would buy from "GO LO" or "CLINTS CRAZY BARGAINS" or the $2 shop

Guest SeZz

lol i start a thread about how a car really is designed to get you from a->b and should get you from a->b and everyone then begins to think its a competition between fords and holdens......oh god! Bad drivers are everywhere.....Im sure you have all done some stupid thing to make you better off on the rd for example cut across in front of traffic 2 make a last minute turn , or didnt indicate...etc etc. Blah...worth laughing about! :rolleyes:

Link? as in internet? Nah not on 'net. The Japs love to get their hands on hot engines (they bought up a few E46 BMW M3s and investigated tuning them).

Trick with XR6T is that it doesn't FEEL fast, until you look at the speedo/time sheet and go, "faaaark, it;s a 1700kg family slush box!"

JUN are being secretive bout the specs of the engine, but apparently it's already past 900hp with single large turbo and head work. Block modifications are next but i dunno what they're doing.

Don't think you'll get to 1500hp as the Falc 4L is still designed as a family/comfort block unlike the RB26DETT/2JZ-GTE which was designed as a competition/tuner engine...

U can't do a whole lot with E46 M3 engines, well not without a whole lot of bling bling. 256kw's out of a 3.2 Straight six, they are rather highly strung to say the least. Supercharger is really the only way to go, altho i'd love to see a Twin Turbo E46 M3 :)

Go into the Commodore Forums and you'll see them bagging us ..... nothing wrong with a bit of friendly bagging ..... its not like gang warfare here so whats the problem? :)

Guest wilco

I'll agree the Commodore seriously lack build quality, and Falcon's are no better, they are the same shit in a different bucket.

The Nissan's are average cars better than Holden/Ford, there is better out there though. If you are looking at imported Nissan's then there sure are a lot of shagged cars getting around though.... anyone who says otherwise is blind.

The R34 GTR is one of my favourite cars (Along with the SL/CL55 AMG, M3 BMW and so on), but I still drive the Bogadore, and I have blown a few of your fellow skyliners into the weeds in a relatively stock car. I have always put this down to bad driving on their part *shrug* who gives a shit, both players had fun regardless of the result.

If Commodores are the guys giving you a go most often, you should be happy, most people see my GenIII badge and back off.

At least my car being a pile of low grade crud means Holden pays for my regular engines/gearbox/diff rebuilds under warranty ;)

I am too busy enjoying the various cars on the road to bother bagging them, (except the asremonkey who crashed into me on Sunday afternoon), but I do find it amusing a thread like this exists at all, when if you go to LS1.com.au everyone lives in harmony, Skyline, Falcon or Commodore :)

I guess I also note however, that a lot of the Holden forum guys have wives and kids, guys with supercharged monaro's, and 2 baby seats in the back, but still putting 300kw to the road ;)

Originally posted by Sonic

Link? as in internet? Nah not on 'net. The Japs love to get their hands on hot engines (they bought up a few E46 BMW M3s and investigated tuning them).

Trick with XR6T is that it doesn't FEEL fast, until you look at the speedo/time sheet and go, "faaaark, it;s a 1700kg family slush box!"

JUN are being secretive bout the specs of the engine, but apparently it's already past 900hp with single large turbo and head work. Block modifications are next but i dunno what they're doing.

Don't think you'll get to 1500hp as the Falc 4L is still designed as a family/comfort block unlike the RB26DETT/2JZ-GTE which was designed as a competition/tuner engine...

Whats your source Sonic? I'm suprised that I couldn't find anything on it...

It's not out of Jun Thailand is it?

Originally posted by wilco

but I do find it amusing a thread like this exists at all, when if you go to LS1.com.au everyone lives in harmony, Skyline, Falcon or Commodore :)

well some guy who signed up on the 9/07/03 started this thread. so u can read whatever u want to into that. Maybe one of the street commo guys got pissed after the facts came out and they realised that a 4 door family sedan cannot be compared to a 2 Door sports coupe, and that the coupe was a better car, surprise surprise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...