Jump to content
SAU Community

Hicas Lockbar Will It Pass?

vinnie32GTS4

By vinnie32GTS4,
in South Australia

 Share

Recommended Posts

vinnie32GTS4 Mentor

vinnie32GTS4

Posted
  • Author
Posted
depends where the cop who is doing the defect sends you!

oh its not for a defect..i bought my car from VIC and need to get it registered here in SA so it has to get checked and all but my hicas has a little leak so im gonna put a hicas lock bar there instead.

Vija Collaborator

Vija

Posted
Posted

Hi, I've changed two cars over from different states and you don't need a check at all. As long as the car is being registered in the same name as in the previous state you just go into the office and show them id and your previous rego slip. Hand over the old plates and they'll give you new ones.

Cheers,

Matt

oh its not for a defect..i bought my car from VIC and need to get it registered here in SA so it has to get checked and all but my hicas has a little leak so im gonna put a hicas lock bar there instead.
ISC-Performance Veteran

ISC-Performance

Posted
Posted

He is putting the car in his name though so at the very least you will have to go to sturt, just depends who you get on the day as to wether it will pass or not. If you havnt already purchased one we have them in stock for $99.

Ryan

bezender Grand Master

bezender

Posted
Posted
Hi, I've changed two cars over from different states and you don't need a check at all. As long as the car is being registered in the same name as in the previous state you just go into the office and show them id and your previous rego slip. Hand over the old plates and they'll give you new ones.

Cheers,

Matt

so hopefully u changed the name on the interstate rego to ur name, then there will be no hassles :D

my car ended in inspection cos it was registered in the interstate owners name, and the person that i got it from never put it in their name (previous SA owner)... i made sure that they cleared it all with regency b4 i bought it and only had to empty my wallet for the rego/stamp duty/interstate transfer fee/new plates.

GTR-32 Experienced

GTR-32

Posted
Posted
He is putting the car in his name though so at the very least you will have to go to sturt, just depends who you get on the day as to wether it will pass or not. If you havnt already purchased one we have them in stock for $99.

Ryan

You sell hicas lockbars? Want one for my car, stupid hicas light flashs on when i turn a bend at speed then goes off once i straighten up, gets annoying.

Sorry bit off topic but one quick question, does the hicas have anything to do with the power steering? Hicas light comes on and i lose power steering, Fill up the power steering well and the light goes off and i get power steering back..?

Dohmar Grand Master

Dohmar

Posted
Posted (edited)
You sell hicas lockbars? Want one for my car, stupid hicas light flashs on when i turn a bend at speed then goes off once i straighten up, gets annoying.

Sorry bit off topic but one quick question, does the hicas have anything to do with the power steering? Hicas light comes on and i lose power steering, Fill up the power steering well and the light goes off and i get power steering back..?

Hicas provides active feedback to the steering wheel... think Force Feedback on an arcade game...you know there are no kinetic forces but the actuators are giving you more of a feel... faster u go, the stiffer the steering gets, which is ideal... one of the worst things about power steering is the overresponsiveness (is that a word?) at high speed... hicas mitigates this to a degree thru the steering wheel (or Boss kit if u get an aftermarket system).... theres another forum thread which goes thru the ins and outs of hicas... basically it helps when you're an inexperienced race driver or an everyday driver... if you do any serious track work, chances are your skills will be higher than required for hicas, however that said, hicas can cause a very steep, very quick corner exit if you have the skills for it, as even a small amount of rear wheel toe in has a significant effect on cornering (Apparently, Dont look at me for details, im a noob)...

No doubt it un-nerves anyone whos not used to it, but once u get used to it you'll wonder how you lived without it... as mentioned before, nissan have kept hicas since the r31, so I really doubt theres any convincing reason to get a lock bar, aside from finances, or superultramegahardcore racing

I have hicas problems at the moment myself. im hoping when i get time to calibrate the system It'll come good, otherwise I'd rather spend the money to get the hicas fixed good and proper. Lock bars are for the hardcore, and i'm not hardcore.

-D

Edited by Dohmar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...