Jump to content
SAU Community

Recommended Posts

hey all i just had my r32 dynoed at hyperdrive, when i bought it i was told it had about 299rwhp with a miss, i wasnt sure so i took it to hyperdrive this mourning with spitfire coils and only pulled 265.9rwhp at 14psi, the boost was all over the place, the guy at hyperdrive told me the hks 2540 wont really do anybetter than that :domokun: so anyway im gonna get a new turbo, any suggestions where to take it or what turbo to get??

cheers

bro theres rb25`s on the turbo upgrade section usen the same turbo for well over 300,

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I had my car tuned this morning at Hyperdrive, its got a GT3082R with similar mods as urself. i went 330rwhp @ 16psi through a built auto box. had fuel issues so i could prob see 340 - 350 once sorted. i would go with the GT30 series ... they are not too laggy when tuned right, mine is very responsive and makes power through 7300rpm, pulls very, very hard =D

+ if yours is manual you would prob see closer to 380rwhp

and im sure yours would beat these apparent stockers making 260rwhp+ on 12psi, dont believe that for a second.

Edited by cactus

260rwhp isn't too much of a stretch.. my 20 with the 25 turbo made 245rwhp on the same dyno and my 30 with the 25 turbo made 243rwhp on the same dyno again, both at 12psi (different days account for the 2hp loss :thumbsup:) my mate has his 33 dyno'd at some place SOR and it made 296rwhp with stock turbo.. THAT is a stretch.. VERY happy dyno there!

i recommend the HKS GT-RS i think brand new from www.greenline.jp is 2.5k give or take...i've been in [Michael]s car and damn its responsive and powerful hahah or even the Trust TD06-25g or 20g but i would go the HKS because its coolant and oil cooled the Trust turbos are only oil cooled also the Garret GT30 series they good to hehe :P

lol thanks :thumbsup:

if you got the cash go for the hks kits as they are bolt on and comes with everything you need or else just get a garret gt30 series turbo(everyone seems to like the 35r)

Edited by [Michael]

Dude i have a GT35R on my FJ20'd DR30 that makes 330rwhp @ 16psi and 355@ 19psi so I opt for the Garret, go to horsepowerinabox.com, they have direct replacement GT series turbo's for Nissan engines for just under the 2k mark.

P.S. The DR will lay SERIOUS rubber down in 3rd :}

I've heard those bolt on GT series use dodgy exhaust housings.. you can get a brand new GT35R for around ~$1800 *paid (1600 for mine but they were special circumstances). A lot of fab. work to be done though.. ;)

Well he either needs to find another tuner (I like Hyperdrive and they do all my tuning, but they said his turbo is maxing out) or look at another setup.

He did ask about other turbos, I was merely pointing out that there are bigger options and that I've heard bad things about the horsepowerinabox turbos that use standard exhaust housings whereas real Garrett items don't.

+ if yours is manual you would prob see closer to 380rwhp

and im sure yours would beat these apparent stockers making 260rwhp+ on 12psi, dont believe that for a second.

380, let's not go too far!

But 260hp on 12psi is quite easy for a stock RB25

Are you 100% sure its a hks 2540?

Yeah, check that out first ;)

haha yeah 250 is not too bad, i had a redtop 20 with 25 turbo makin 240rwhp @ 11psi, but 270rwhp @ 12 psi i cant see happening unless its a freak lol

He has an RB25, not RB20 :)

yeah, i would be having doubts its actually a 2540 (given the tune is ok).

if its HKS, it should be marked on the front cover with HKS shouldnt it?

I'd be checking too.

On the top of the shaft, in between the compressor and exhaust sides HKS stamp the model on the little silver label.

:O just had a better look with the torch to find the GARRETT on the turbo, did the 25 come stock with a garret turbo? i shall be visiting the guy who sold it to me now :P ... well its an excuse to get a new turbo anyway

if it has garret written on the front it aint stock because the stock rb25 turbos have nissan (eg:http://www.imagestation.com/picture/sraid218/pdaf6db9e994775671341d8e5f6208cf4/ec08caf8.jpg) so if it was a gt2540 you could easily tell because hks would be written on it somewhere...

tru, well so i have a garrett something, il probly take it in somewhere tomrow to see if they can tell me what it is... F#&KN Pi$$ed off tho, im gonna go see the guy who sold it to me and work something out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...