Jump to content
SAU Community

Recommended Posts

If I could go back I'd have gotten an early start on bench press while I was still young to balance it out.

Yer not to downplay 45kg as it took me some time to get to that, but for gym newbies it just doesn't sound like much when you compare it to core exercises like bench press, lateral exercises etc. further emphasising our point that isolation exercises don't need much weight particularly if it's a small muscle group.

Like a lot of us blokes I used to come into the gym and default to bench press and bicep exercises - not paying enough attention to triceps or lats... as you say, in hindsight you'd opt for a better balanced routine!

It's true it will raise your base metabolic rate because you burn through alot of energy when lifting and it will lose you some weight. Cardio is what really burns through the fat though. Combination of both will serve you well. Cardio also helps you to get through your workout easier and vice versa.

Both rugby and AFL players seem to put more emphasis on athleticism than brute strength these days.

As B said put more emphasis on the cardio, but you've got the right idea in not forgoing the weights altogether. Even though you're not training for strength, you can do weight training (45 min) followed by 20-30min cardio. The weight training done prior will continue to use up glycogen stores and burn calories even an hour after you've finished, whereas the more heart-rate-intensive cardio will tend to burn the calories nearer the time when you're doing it. This is one reason not to blindly believe the "Calories" readout on the cardio machine you're using as it doesn't tell the whole story. I've had great results by doing weights and cardio one after the other.

If you *are* trying to lose weight as a goal, then I suppose it is okay to do multiple exercises (as in a 'circuit' routine). Using lighter weights and minimal rest periods in between will get your heart rate going and encourage some fat loss (as in callisthenics). The goal would be to move from one station to the other with as little time in between as possible. I would probably still prefer to limit the number of muscle groups involved in one session though, and mix it up from session to session to provide some variety (necessary both for the body and for the mind in terms of motivation!). Having said that, doing leg exercises as part of your weights will help to burn fat quite effectively as they are a large muscle group and hence burn those calories well; while leg curls are good for the hammies, keep up those squats and lunges as they also incorporate some upper body to help provide more of a whole-body workout too. Use your trainer to make sure your squatting form is good otherwise you can do yourself some nasty injuries.

took me ages reading the last page, some good info.

Most young guys started off in the gym working pecs and biceps right? I know I did, perhaps thats because I had no guidance though.

also agree on the delt training, really do not need much weight at all if you are trying to isolate them.

Question, how much weight do you guys use on a front raise for shoulders and what kind of form do you use?

Edited by gersfan

Not a huge fan of front raises, I always thought they'd be bad for the lower back and rotator cuff...that said I have a weird left shoulder that seems to pop out when it feels like it lol, so gauging that by my own retarded body. Anyone ever hurt themselves doing front raises?

Yeah I don't really do front raises as I don't concentrate on them TOO much during my shoulder workouts as they kinda get trained from the chest workout as well. The only front raises I do are close grip but they are an exercise for traps, get a nice squeeze out of them :)

yeh i do front raises... with 12kg dumbells.. do one arm simulataneously (spellcheck anyone??).. i find that if you do a two arm front raise... you have very little balance and your arms are locked in to the position which is a little unnatural as you get to the top of the movement...

Birds... this is probably why your shoulder popped out.... at the top of the movement, your rear delts kick in and your lats pull together... squeezing the shoulders out... doing one arm front raise allows your body to twist a little so your shoulder can handle lifting the weight to 90 degrees..

p.s. im also like you... skinny kid in school.... will never be a "big" guy.... wide back but fark all chest.. haha.

think about it... you cant swing your shoulder in a complete circle... it will swing fine by your side... but at some point it has to go wide when it is nearing 90 degrees and from there it will go out sideways until the joint allows it to come back in to your body... if your arms are locked on to a flat bar... where can they go???

but if you swing one arm... your body can twist a little and you can make that arm go in a perfect straight circle.

also, id like to share a piece of info that i only learned over the weekend... some people may know it, some people might not...

flexing and posing helps with muscularity and blood pump... say after doing a chest set... if you flex and hold a pose for a minute or two... it will help with muscle seperation and get more blood flowing to that area... how you flex and what you "pop" can make a big difference to the shape of your muscle as it grows.... this can be the difference between a sunken but wide and blocky pec, or a short, sharp, but bulbous pec.

cheers

Linton

Apologies Linton, I should have clarified that my shoulder pop is actually a naturally occurring rotator cuff dislocation thing that I've had since I was very young. It doesn't give me any trouble or pain (I can actually make it pop on purpose, good party trick), but I do avoid putting weight on it when the shoulder is in that particular position (i.e. arm near or above head and moving out to the side) and have never bothered to see if front raises affect it or not (I just assumed the exercise would interfere) for fear of damaging the joint.

Behind neck shoulder press is the only isolated shoulder exercise I do and for some reason this doesn't affect it - I'm guessing because the other arm keeps it balanced and strict as per using a barbell. Might try front raises both ways (simultaneous and alternating) with small weights and see which is better for me, but interestingly, I suspect your method would actually make it pop given the pop occurs when my arm moves out to the side pivoting away from the body. Two handed front raise on a barbell is probably worse for lower back but probably better for my retarded shoulder because it will keep the arm in line with the body as best it can.

*curses the asymmetric properties of the human body*

And yeah, agree on the flexing/posing front after sets. Seems to make sense. I imagine it prevents the muscle from tightening into something of a knot. Similar in effect to a wide range of motion.

took me ages reading the last page, some good info.

Most young guys started off in the gym working pecs and biceps right? I know I did, perhaps thats because I had no guidance though.

also agree on the delt training, really do not need much weight at all if you are trying to isolate them.

Question, how much weight do you guys use on a front raise for shoulders and what kind of form do you use?

Don't do front raises these days, I need more focus on rear delts, just like you said I've worked the pecs and biceps too much in the past, relative to the back and tris. I will do side raises and overhead dumbell shoulder presses though.

*curses the asymmetric properties of the human body*

Yep. And I was just reading a respected bloke's article today about how your ratio of chest / leg girth should be around 1.7 or lower... Need to get back into the leg workouts more!

1.7 damn, I think I need to hit the leg weights too lol. Easily the most neglected muscle group!

Should add that my shoulder popped whilst I was cursing the assymetrical properties of the human body with my left arm...now that's irony.

Okay, 1.7 is prob ambitious for the intermediate gym-goer (like me)?

0 to 1.7 Congratulations, you have thighs of death!

1.7 to 1.85 Great legs, nicely proportioned to your torso

1.85 to 2.0 Your legs are lagging a bit but not bad

>2.0 You have severe chicken-leg syndrome

Taken from this guy's website - love his work - explains things clearly and doesn't seem full of himself - doesn't have ads on his page or charge a membership, etc etc. so you get the sense he's motivated by helping people and his love of the sport, as opposed to making money.

http://scoobysworkshop.com/legs.htm

This guy is great and I'd recommend all his videos to anyone. His vids were the first I ever used to get my form down and I'm glad I found these before others as his form is excellent. He obviously knows what he's doing, looks like he's got quite a big fanbase nowdays.

They dont work, have a Mate whos a PT, he doesn't suggest it to any of hes clients. I dont remember the reasoning, but a better diet will work better than these (in a healthy way)

Wow thanks man, you've totally changed my perception of whatever it is you're talking about. Not only, but I will be looking to consult you for further advice on topics because of your connection to an expert in the field who has obviously learnt more in his certificate courses than all of us combined in our years of training. Care to elaborate some?!?!

Cheers.

http://www.thepumpingstation.com/1repmax.html

A great little tool to help you workout what you should be lifting per set, ie 10reps warmup, 10reps touch heavier, 8 reps work set then 8 reps heaviest work set.

Andy, what was working for me was a weights session and then straight into 20mins flat out on the punch bag.

Consistancy is the key and about 4 times a week is good, maybe break it up with weghts and a run one day on the weekend.

Either way I dropped 10+ kg in 3 months with this routine.

Wow thanks man, you've totally changed my perception of whatever it is you're talking about. Not only, but I will be looking to consult you for further advice on topics because of your connection to an expert in the field who has obviously learnt more in his certificate courses than all of us combined in our years of training. Care to elaborate some?!?!

Cheers.

he must have read the title, clicked it and just typed reply instead of reading 44 pages

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...