Jump to content
SAU Community

Recommended Posts

yea i couldnt get two of the same shots.. next time i take one itll be the same as the second photo..

goin to try cut another 4kgs and see how im looking from there, just really wanna get some good ab definition back and get rid of the love handles

Brought a slow release protein shake today, forget what its called but along the lines of "Slow Releaze" flavor is Vanilla Devine...

Also got myself some German brand Creatine which has me a little worried, 20odd gram servings....

To go along with that I got some Jacked 3d to see how that works.

havent used monohydrate yet mate,

ive tried using Krealkaline, it basically has a higher ph level (more alkaline) and stops your stomach from breaking most of it down before ur body can actually use it (thats what the suppliment companys say anyway)

ive stopped using it for a while so ill be giving it another crack and see if i can notice a difference in my training..

never really got into monohydrate stuff as alot of what you take doesnt actually get into your system, thats why u need to load on it and take so much of it.

People do say theyve had good results with it though. You will more then likely put a kilo or 2 on in the first few weeks due to water retention

Edited by GTR_JOEY

The loading phase is one of those debatable subjects where everyone has an opinion if it's necessary or not. I personally do not load and only take the 5g serving a day in my PWO shake. It's a fairly inexpensive supplement anyway and there are alot of articles that claim it works.

With suppliments i generally try and take a bit more then what is recommended..

id rather overdue it a little bit then under do it and be wasting my time and money..

thats what i reckon anyway

I've heard it's one of the few suppliments that actually has a quantifiable effect. I'm interested to see if it will help my training as far as increased work capacity goes because that's where I'm struggling at the moment when training upperbody - I'm just getting tired/fatigued too soon, I want to do more work but just physically can't.

Mike, something like Scivation Extend may help with covering the fatigue you are experiencing

http://www.bodybuilding.com/store/sv/xtend.html

Its the BCAA's that feed your muscle cells during & post workout, helping release ATP (cell energy).

Ive ordered a tub & will see how it goes for me. Will use it during workout in my water bottle.

Had a good 100min session just now, pretty stuffed :) After 17sessions Ive found Im now back to my starting weight (lost then gained 3kg); drinking heaps of water so most likely fluid retention along with some muscle growth / fat loss.

One of our resident heavy lifters wanna critique my squat form? Just feels (and also looks) like I'm leaning forward retardedly when I'm standing straight. Also how does the depth look for 100kg? lol

It's also annoying how skinny/small this makes me look lol, think it's from the position my arms/shoulders are in. Finally, yes, I realise my ass is somewhat of a stand-out feature (nohomo)

http://www.youtube.com/watch?v=Z6bXlgbqshg

Depth isnt to bad to start with, you sorta get a bit lazier towards the end

of course you can go deeper but it needs to be a comfortable movement, maybe go lighter and try for depth next session

form isnt to bad, make sure u keep a tight core, a straight back and push off ur heels as your coming up

Cheers for the tips :) I can go deeper, was just getting lazy :P really couldn't have been f**ked doing anything today, tired and sunburnt :( Is my lower back a little too curved back? Feels fine and natural to me when I'm doing it. Also really, listen to the music in the background. How the f**k am I supposed to be motivated by that trash?

Here's 130kg I did afterwards, definitely not as deep and I just got really meh towards the end:

http://www.youtube.com/watch?v=xN9sMsHVC3o

More weight isnt always better. My "warm up" exercise is standing calf raises, after stretches; been doing them in sets of 15 (6-7 sets generally) at either 100 or 110kg.

Today went down to 50kg and did them real slow, nice and slow with a hold/contraction at the highest point of the raise - wowee!! Hardcore burn from it; cant wait 'till tomorrows set! Really showed me Form > Mass

I've heard it's one of the few suppliments that actually has a quantifiable effect. I'm interested to see if it will help my training as far as increased work capacity goes because that's where I'm struggling at the moment when training upperbody - I'm just getting tired/fatigued too soon, I want to do more work but just physically can't.

I noticed i had more "time" in me when I was using it a couple years back. Not energy, just more so less fatigue in actual muscle.

You can "load", however I found it just upset my guts massively so I backed off after a week and just went normal doses.

Usually morning and arvo mixed in with a shake (shake being post workout usually)

It's like having sand mixed into it though... Just a word of warning :)

Drop the weight, go much, much deeper. The safety bars beside you are far too high.

Try doing box squats to build your confidence in depth.

Will try box squats for sure. 90kg I can get down as low as I can physically go without having to lift my heals in order to keep my balance. Haven't actually tried going that low with higher weight.

Troz, they are quarter squats, need to go much deeper mate. Think of it this way, by only doing a 1/4 of the lift you're missing out on 3/4 of the training benefit = big waste of time.

From looking at that I reckon you could benefit greatly from starting with 60kg, and do either 5 sets of 10 reps, or 2-3 sets of 20 reps per session, going all the way down (hamstrings need to touch your calves), every session you complete the sets x reps then add 2.5kg next session. If you're eating enough food and getting your sleep you should be able to consistantly add 2.5kg every session all the way up to at least 100kg before it starts getting tougher, but by that stage you'll have built a solid base and mental endurance for pushing through it.

Here's an old vid from a few years back when I first started training like I describe above, it's the best example I can give of what a full squat is and how a proper 20 rep breathing set should be done (that is, 3 big breaths at the top of the lift) - http://youtu.be/NWUxf4Y8twU

Edited by GHOSTrun

I'm starting to think that video is actually making it look like I'm not going as low as I really am. Believe me, there's not much further I can go before I physically can't go lower.

60kg doesn't even feel like there's weight there. 20 reps is a walk in the park. As I said above, I can easily to 12 reps of 90kg as low as I can possibly squat (the point where you can't quite balance without lifting your heels)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...