Jump to content
SAU Community

Recommended Posts

Has anyone tried Musashi Bulk? Ive tried looking for reviews but can't seem to find any.

I'm considering buying some...

Yeah I have used it quite a bit in the past. I consider it a pretty "safe" protein powder, as in it won't really mess with my gut (no creatine), and it's made by a proven, mainstream manufacturer. I used to use it in conjunction with Musashi 92, depending on the time of day or if it coincided with my workout. The Bulk has carbs, so it's better for pre or immediately post workout, while the 92 has very few carbs so it's better as a supp before bed, in the morning if you know you're having carbs for breakfast, or just as an in-between-meals protein shot.

You can definitely get both of those cheaper online rather than through the shops.

LOL

No, but if it's a daily and you need to keep driving it you don't drive it at 100% WOT until you've fixed the miss...

I get your point, all I was saying is that I'll avoid those movements right now until I've had a chance to get into physio, have it assessed and continue with recovery steps, in the mean time I can at least get a little leg work in with some lunges without straining that nerve/muscle/whatever it is.

I've got a holiday starting this Friday so can give it some rest then, be lucky if I see the gym at the hotel twice while I'm away.

You didn't have to edit out Laser GLI and change for Meteor either, I got it the first time :D

Edited by ActionDan

Squat - The exercise = deep squat.

Squat - The event = hip crease below knee height.

If you are not a competing lifter lifting a massive weight for 1 single rep - squat all the way down

Do a test.

load up your bar with whatever you squat for 10 reps and do 3 sets of 10 reps to parallel.

next session to the same weight and sets x reps but squat deep.

It will be harder and you will feel soreness you didn't with the parallel squats.

Foot position is not so important.

what ever makes your knees feel OK.

generally, they will point outwards.. probably closer to 30 degreese that 45.

Both deep and not-so deep (parallel or just below) squats can work.

There is debate over which is safer but, basically either done right will give an equivalent development.

Well respected athletes and coaches on both sides of the methods. Arguments are mostly on which is less injury risk.

I've done and had training on both. I believe either can be done safely enough but, like an advanced driving course squats are much better experienced with a few expert lessons. Whatever the instructor shows you , do that. It all works, just not so well if you have been coached (term used loosely)by people with bad habits themselves.

You could start a whole thread on discussing them that's for sure.

Rack http://www.samsfitness.com.au/products/bench-presses--power-racks/powertec-power-rack

Bench http://www.samsfitness.com.au/products/benches/powertec-utility-bench

I'm not going to get around to setting it up until next week I reckon because I've just moved into my new home so I have a lot of other things to do (reason I haven't lifted/eat properly in over 2 months), lost 4kg....

I have weights and bar but I don't have a weight stack yet but will get one when I get around to it. I'm going to have the rack sitting on carpet, you reckon it's worth getting the matts for underneath?

Depends if you care about your carpets.

Rubber mats might also leave a stain on your carpets.

Dans idea of a carpet mat on top of the carpet might be a good idea.

If you give no fark for your carpets then don't bother.

Mine is outside on a stencilled concrete patio floor so I have rubbr mats even though my plates are rubber coated.

it protects both the floor and plates.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thanks for that mate always a good help
    • It's not really a calibration issue, if the voltage is really at 2V. If the voltage is 2V, then that's what the TPS is putting out, and the Haltech is seeing that and 2V is about 40% open (you know, between 0.45v being closed and something close to 4.5V being fully open). So, that would suggest that the TPS is maladjusted, on crooked, something something something. Or a wire problem.
    • Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
×
×
  • Create New...