Jump to content
SAU Community

Recommended Posts

Foam roller might help a bit if the problem is muscular. I use it a lot on my legs / hip flexors, t-spine stretch etc and find it helps a lot.

Before you even mentioned shoes I was going to suggest you consider what you're using when doing squats or deads. Changing from regular cross trainers to hard, flat soled shoes made an immediate difference to my squatting. Felt so much more secure. I used to get bad hip flexor / TFL pain when doing squats and much of that was because my legs were so tense trying to stabilise the weight. It's not completely gone but it's better. Pendlay Do-wins or similar would be better still but with the amoutn of Oly lifting I do I can't justify the cost for shoes I wouldn't wear anywhere else. I am sure I lean forward a bit too at the lowest part of my squat, it's probably that it feels like the weight is going to fall off backwards (even though that is unlikely) and you instinctively try and move it forward. Maintaining tension in the abdominals and core is also so important in squatting and DLing, so I am learning.

Physio visit today, she has strapped both feet heavily to see if raising my arches helps.

She also wants me to focus on core/lateral oblique movements an come back in 2 weeks.

Podiatrist friend said leg length and arch response (as in when u are flat footed and pull the big toe up the arch should respond.) she suggested orthotics. Physio said strapping will prove if that's right.

Myo, the only one I actually pay for also gave me oblique targeting stretches (also good massage) and after my last visit (4th I think) said it was the first time my leg lengths and pelvis tilt had been even.

All see to think that if squat/sldl etc was the cause there'd be an acute pain during those motions which there isn't.

I did specify which spot on my back a few posts back with a diagram -basically lower left side.

I don't think a few on and off hours of awkward snoozing in hospital chairs has helped either.

Edited by ActionDan

Physio visit today, she has strapped both feet heavily to see if raising my arches helps.

She also wants me to focus on core/lateral oblique movements an come back in 2 weeks.

Podiatrist friend said leg length and arch response (as in when u are flat footed and pull the big toe up the arch should respond.) she suggested orthotics. Physio said strapping will prove if that's right.

Myo, the only one I actually pay for also gave me oblique targeting stretches (also good massage) and after my last visit (4th I think) said it was the first time my leg lengths and pelvis tilt had been even.

All see to think that if squat/sldl etc was the cause there'd be an acute pain during those motions which there isn't.

I did specify which spot on my back a few posts back with a diagram -basically lower left side.

I don't think a few on and off hours of awkward snoozing in hospital chairs has helped either.

have you ever seen anyone that squats or deadlifts 2x + their body weight with a weak core?

Not doubting you need core, just putting it up for discussion.

If its purely a core issue then I'd be more

Inclined to think its less related to my foot/ankle and more so a strain from starting back work on a weak core. Which seems odd as it doesn't hurt during those motions.

Not hard to think that my core is weaker after working From a recliner for 8 weeks and generally staying off my feet, then only walking on one (so perhaps an imbalance).

I think it was TTT who pointed out I wasn't setting up well enough also so might have strained something also - I feel better about setup at the moment.

With the baby stuff happening I have had to skip gym so we'll see if that plus foot strapping helps.

OK so apparently that video I put up of my +26kg x11 reps weighted dips was a piss poor effort on my part, lol. Last night smashed out +32kg x12,12; then +36kg x10; then +40kg x8. Totally stoked with this effort!!

Reckon I can get +50kg for at least 8 reps by the end of the month?

that's some mighty pec/tris you have there.

haha perhaps you're right :P although my bench press doesn't back this up, but I think that's due to poor delt strength....fking imbalances!! Partially why I'm focusing more on incline press rather than flat bench - just to activate front delts a little more. Incline dumbbell press is up to 34kg x9,7,6,6 reps now though :D

And yes I'm doing my best to balance out with pull/back exercises. Plenty of rows with various handles, face pulls with the rope handle, upright rows etc etc :)

lol

Trozzle: good work mate, yep 50kg x 8 not far off... my ability to do bodyweight stuff like dips/chins has gotten steadily worse as I've gotten heavier... and of course I'm not focusing on them anymore

cheers :) funnily I'm finding it to be the opposite myself lol - as I'm putting on weight, I'm getting much stronger. Just goes to show how restrictive my diet must have been before when it comes to energy and recovery I guess. Trade off is that I can no longer see my previously well-defined abs hahaha

yeah I've gotten a lot stronger as my weight has gone up too... but a lot of it has been to my legs, which doesn't translate well to dips/chins!

you have to work out what your goals are... if they are to put on size and strength then your going to have to eat for it... some guys can maintain abs while eating and lifting big, some need to let them go to make progress

put on the muscle now and your metabolism will be quicker when it comes time to restrict calories

everyone thinks they are big enough and have enough muscle etc... until they stand or lift next to a properly big guy... all of a sudden they don't even look like they work out lol

Edited by NickR33

If you spend a good night looking at bodybuilder photos or strongman competitions, then see yourself in the mirror later or even look down at your arms...things get a bit depressing lol

Goals are aesthetics...which at my previous state required me "bulking" to put on some more muscle mass (and alas, the unavoidable fat when trying to put on mass quickly). Figure we're rolling into winter so I don't really care about losing my abs and bloating out a little...I've cut back once with relative ease so I know it's easy once you commit to it, and as you said - more muscle mass will only make the cut faster due to BMR efficiency. Come beginning of September at the latest, I'll start summer conditioning...see how it goes.

We used to do a friendly comp on another BB site I was/am a member of.

A former member who passed away had started a thread many years ago called "Mild Summer Cut" and so every september we'd do a "mild summer cut" comp in memory of him etc.

Before and after pics and weights etc... and update the thread with what we were eating and so forth.

couple of members had supp stores and put up prizes for the winner etc.

but it was a 12 week effort where you try to come in to the first day of Summer in the best condition you could.

I recon get hayooooge from now and do a proper 12 week cut.

since it's your thing...

Edited by TTT

OK so apparently that video I put up of my +26kg x11 reps weighted dips was a piss poor effort on my part, lol. Last night smashed out +32kg x12,12; then +36kg x10; then +40kg x8. Totally stoked with this effort!!

Reckon I can get +50kg for at least 8 reps by the end of the month?

good effort. what sort of workout comes before you do your dips? or are they a primary?

Edited by jangles

We used to do a friendly comp on another BB site I was/am a member of.

A former member who passed away had started a thread many years ago called "Mild Summer Cut" and so every september we'd do a "mild summer cut" comp in memory of him etc.

Before and after pics and weights etc... and update the thread with what we were eating and so forth.

couple of members had supp stores and put up prizes for the winner etc.

but it was a 12 week effort where you try to come in to the first day of Summer in the best condition you could.

I recon get hayooooge from now and do a proper 12 week cut.

since it's your thing...

I always plan to do some variation of this... but it never happens!

good effort. what sort of workout comes before you do your dips? or are they a primary?

The last 2 sessions where I've pushed hard on weighted dips, they've been my second exercise for the session - preceded by incline dumbbell press on both occasions (also pushing out new PB for reps on this for both session).

We used to do a friendly comp on another BB site I was/am a member of.

A former member who passed away had started a thread many years ago called "Mild Summer Cut" and so every september we'd do a "mild summer cut" comp in memory of him etc.

Before and after pics and weights etc... and update the thread with what we were eating and so forth.

couple of members had supp stores and put up prizes for the winner etc.

but it was a 12 week effort where you try to come in to the first day of Summer in the best condition you could.

I recon get hayooooge from now and do a proper 12 week cut.

since it's your thing...

haha you always refer to the idea of training for aesthetics in a negative way with sarcasm etc :P but yes, that's about where I'm headed...continue steady gain until it's time to cut, then see where I am after 12 weeks of proper cutting.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...