Jump to content
SAU Community

Recommended Posts

Hey everyone,

My 32 GTR has a problem, it has all your basic mods, n1 turbos etc etc.

Today it started doing a few funny things. When I a accelerate, the car might hit say, 2500-3000 rpm then start stuttering/hesitating,

i'll put it in 2nd, and it might hit around 4000rpm and just cut out, as in stop accelerating all of a sudden. If I play around with the gears,

the car will get moving again.

And sometimes, it runs real good, in 1st/2nd, but 30 secs later it will have the hesitating problem, the car gets stuck at a certain RPM and refuses to budge,

unless I shift up or down. And it even almost stalled once, revs dropped to 0, i tapped the accelerator right before it would have stalled. It is strange that i cuts out completely,

usually, if a car pings, you keep accelerating, it will hesitate, but get through the rev range. Whereas in this case, it does not.

Going to the mechanic tomorrow, but has anyone had this problem before, in case it is something simple I can fix.

Thanks.

Edited by IOWNU
Link to comment
https://www.sau.com.au/forums/topic/200879-r32-gtr-running-poorlyhelp/
Share on other sites

umm sounds very similar to my issue and i have followed the tut on cleaning the afm and checking the solder.. still happening.. does anyone know voltage the afms should be seeing normally

Just change the AFM, no point stuffing around with a stuffed AFM.

I had to change 1 and now its running fine.

Thanks for the help guys.

the power supply to the ignitor and the earth wire at the back near the ignitor...check those harnesses..had the same problem with same symptoms with my old GTR....bcos i was getting the coil cover resprayed had to move the wires and cos its older car the wires can become hard...and think thats was caused mine to cut out etc as above

hope that helps if it isnt the AFM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
×
×
  • Create New...