Jump to content
SAU Community

Stolen Parts

spunkrat

By spunkrat,
in Queensland

 Share

Recommended Posts

spunkrat Contributor

spunkrat

Posted
Posted

Hey guys

Woke up this morning(Sunday) and went to go to work at about 630am and both the driver and passenger door of my Silvia, which is parked on the street outside my house, are open. Some low life scum broke in and took some gear.

- RB25 series 1 loom

- RB25 series 1 ecu

- RB25 exhaust manifold

- KKR/JJR430 turbo

If any one has any info on this, sees this stuff for sale cheap, or has a mate that suddenly has this stuff please let me know on 0438187369. This happened on southside brisbane.

Alternatively if the f**kheads who stole this shit return it to me asap I wont ask any questions. If I find out who you are and you dont return it, I wont hestitate to break bones. ;)

Thanks guys

Bren

Link to comment
https://www.sau.com.au/forums/topic/201413-stolen-parts/
Share on other sites
dano4127 Veteran

dano4127

Posted
Posted (edited)

not good brendo was the mani/turbo on the motor or inside the car?

I have a Rb25det ecu you could borrow if needed

also will have a R32 rb25De loom when my new motor arives if that can be used

where are you living these days?

Edited by dano4127
Link to comment
https://www.sau.com.au/forums/topic/201413-stolen-parts/#findComment-3580188
Share on other sites
Eug Grand Master

Eug

Posted
Posted
I'm thinking that is some serious knowledge of your car prior to the theft. I'd be looking nearby actually. Was the car out in the open or did these guys have some quiet time to get what they needed??

i'm with dave, looks like they knew what they were after.

the problem with the car scene is that alot of people freely share knowledge about what they have/next mods/what's in the build/etc with complete strangers they just met. a little discreetion doesn't go astray.

Link to comment
https://www.sau.com.au/forums/topic/201413-stolen-parts/#findComment-3580213
Share on other sites
spunkrat Contributor

spunkrat

Posted
  • Author
Posted

Thanks guys. Yeh Im thinking it is either someone I know, or someone who knows someone I know, something like that. My house is in a dead end street so its not like they were passing by and decided to break in.

Dano: Thanks for that man, will let you know if I need to use the stuff. Im livin near Sunnybank now, where are you at?

Link to comment
https://www.sau.com.au/forums/topic/201413-stolen-parts/#findComment-3580942
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • Kapr
      Freddy Plenum vs Genuine options RB25

      By Kapr · Posted

      @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Dose Pipe Sutututu
      Neil's R33 Gts-t Build

      By Dose Pipe Sutututu · Posted

      Holy shit... wow!!! I totally missed this
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...