Jump to content
SAU Community

Recommended Posts

I'm about to install my sub/subs into the 34 when I've found a suitable amp and i'm tossing up a few options. I can install 1 or 2 10" subs and i'm looking for the most space saving install as I use the boot for groceries etc. One possibility I was tossing up was installing the two, one on either side of the boot in those "pocket-type' areas. Anyone willing to share pics of their setups so I can get some more ideas. I was also wondering if anyone was able to tell me what an approximate 'fabrication cost' would be for the setup i suggested done professionally?

Cheers

Yvonne

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/
Share on other sites

here is a pic of my sub + amp in a box (12" JVC active sub) along with my separate 2 channel JVC amp which is powering my DLS front

its a bit messy at the moment but only cause i just wanted that sub in!!!!!

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3584608
Share on other sites

you can get premanufactured sub boxes that are moulded to the left corner of the r34 boot. when ive got the money together to get a decent sub and amp ill be getting one. they're about $300ish for a 12" sub. probly much the same cost for 10" maybe a bit less.

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3586260
Share on other sites

you can get premanufactured sub boxes that are moulded to the left corner of the r34 boot. when ive got the money together to get a decent sub and amp ill be getting one. they're about $300ish for a 12" sub. probly much the same cost for 10" maybe a bit less.

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:(

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3587643
Share on other sites

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:)

Would like to know this information too! :(

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3587878
Share on other sites

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:P

Ive been quoted them from Maroochy Car Sound and Sound In Motion here on the sunshine coast. They are only moulded for left side. i guess something to do with it being in the way of things on the right side. Ive seen one moulded for a 33 and they take up fark all space.

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3588538
Share on other sites

here is a pic of the install in my r34. sub was mounted in the tyrewell and amp mounted on a new board under the strut brace. keeps plent of boot room aswell!

post-9854-1200456448_thumb.jpgpost-9854-1200456523_thumb.jpg

heya bro.. that setup seems strangely familiar :)

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3589165
Share on other sites

here is a pic of the install in my r34. sub was mounted in the tyrewell and amp mounted on a new board under the strut brace. keeps plent of boot room aswell!

Plenty of boot room but you cant exactly use it without something possibly poking through the sub! Needs a sub cover/grill to protect it then the boot room would be usable :)

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3589371
Share on other sites

  • 3 weeks later...
there is a fellow on the GC that makes them for wholesale to shops. I can get hem as well but I'm not sure if he does a 34 though.

Reckon he would do a group buy on them?

Say 10 of each, r32 r33 r34?

Id be VERY keen depending on price

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3621521
Share on other sites

hey guys

here is my sub install. has plenty of room in the boot for other shit. i havent yet finished it. still needs the false floor made up and side closure panels to complete the sub facia.

cmplex design on the box, has a L shaped box with curved in sides. sounds good, specs say 1.25sq ft for the proper sealed box, mine is about 1.10sqft. little under size but not noticeable.

will post more pics once i complete it this weekend or mid net week

post-31466-1202382468_thumb.jpg

post-31466-1202382558_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3631240
Share on other sites

hey guys

here is my sub install. has plenty of room in the boot for other shit. i havent yet finished it. still needs the false floor made up and side closure panels to complete the sub facia.

cmplex design on the box, has a L shaped box with curved in sides. sounds good, specs say 1.25sq ft for the proper sealed box, mine is about 1.10sqft. little under size but not noticeable.

will post more pics once i complete it this weekend or mid net week

Keep us updated dude!

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3632085
Share on other sites

  • 3 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...