Jump to content
SAU Community

Recommended Posts

yeah, definitely not cheap - try having 4 sets of rims! tyres are definitely on my no expenses spared list though.

one set for street, one set for motorkhanas, stockies for drag (which i just sold the other day) and a set of nismo lmgt4's which are somewhere on the atlantic. hello re55!

one set for street, one set for motorkhanas, stockies for drag (which i just sold the other day) and a set of nismo lmgt4's which are somewhere on the atlantic. hello re55!

Yeah, I've got 3 sets of rims (I don't drag).

I've got a set of Nismo LM GT4s for circuit (<3 RE55s), my street tyres, and the stockies are wrapped in Nangkang NSII's. I was going to use these for the Circuit Club Nangkang Challenge (and for dori days) but I went to a skidpan day recently and didn't swap out my more expensive street tyres.

I'm tempted to run the Nangkangs at Eastern Creek on Friday and seeing if I can run under 2 mins, actually.

should we start an lmgt4 club? :D give the nankangs a go, it can't hurt.

however i have found that only the more premium brand and model street tyres perform well at track days. even then they only last a few hot laps before you see your lap times getting worse and worse.

i was paying around $250-300 per corner for some high end yokohamas that would last around 15-20,000km (street and track). money better spent on track rims with semi slicks.

for practices

every second wed arvo (not today, next week)

$40 to drive, $5 to watch

need a helmet, long clothes, battery bolted down ect

starts at 4pm till dark (nows the best time of year for it)

plenty of newbs, plenty of pros and plenty in between. 3 quarters of the feild is turbo nissan import though

most people think archerfeild is alot harder for a beginner over QR. probably because archy is really tight and technical whereas at qr you can just speed into a corner and wait for it to slide out and just try to hold it for the corner. non turbos struggle at QR though, mines screaming its tits off in 2nd but doesnt like 3rd. wish i had decent steer tyres though.

Was on semi-slicks, so I needed the rain as the tired old 97rwkw needed all the help (and revs) it could get! :(

drifty1km3.jpg

drifty2zf7.jpg

Does it on gravel most weekends tho :)

tmcc257fz2.jpg

New motor on the way for more N/A POWA!!!

Edited by screamin'
  • 2 weeks later...

Yeah the tape on the headlights means when you do tap something the glass doesn't fall out onto the track.

Also saves your lights from being broken by random stones.

baron - yup, it's primarily a gravel rallycar. Still need to do a bit more work to make it hook up on the loose stuff, but it is a hell of a lot of fun!

Id love to have a car like yours screamin!

You must have a fair few club events over there if most weekends? dam thats good!

*gets naughty thoughts of doing something similar to the r31 daily....*

agreed, nothing like a dirty filthy thrash car for rallies and motorkhanas

It is a lot of fun. I keep the roadcar way too mint to drive on gravel roads or compete @ 100% so I had to get another one for that purpose.

As far as gravel rallycars go it's in really quite mint condition! :)

And yip, most weekends there is a sprint or hilclimb on. When they aren't on there is alway trackdays

(like yesterday :) )

sliideslidingmh6.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...