Jump to content
SAU Community

Recommended Posts

yeah, definitely not cheap - try having 4 sets of rims! tyres are definitely on my no expenses spared list though.

one set for street, one set for motorkhanas, stockies for drag (which i just sold the other day) and a set of nismo lmgt4's which are somewhere on the atlantic. hello re55!

one set for street, one set for motorkhanas, stockies for drag (which i just sold the other day) and a set of nismo lmgt4's which are somewhere on the atlantic. hello re55!

Yeah, I've got 3 sets of rims (I don't drag).

I've got a set of Nismo LM GT4s for circuit (<3 RE55s), my street tyres, and the stockies are wrapped in Nangkang NSII's. I was going to use these for the Circuit Club Nangkang Challenge (and for dori days) but I went to a skidpan day recently and didn't swap out my more expensive street tyres.

I'm tempted to run the Nangkangs at Eastern Creek on Friday and seeing if I can run under 2 mins, actually.

should we start an lmgt4 club? :D give the nankangs a go, it can't hurt.

however i have found that only the more premium brand and model street tyres perform well at track days. even then they only last a few hot laps before you see your lap times getting worse and worse.

i was paying around $250-300 per corner for some high end yokohamas that would last around 15-20,000km (street and track). money better spent on track rims with semi slicks.

for practices

every second wed arvo (not today, next week)

$40 to drive, $5 to watch

need a helmet, long clothes, battery bolted down ect

starts at 4pm till dark (nows the best time of year for it)

plenty of newbs, plenty of pros and plenty in between. 3 quarters of the feild is turbo nissan import though

most people think archerfeild is alot harder for a beginner over QR. probably because archy is really tight and technical whereas at qr you can just speed into a corner and wait for it to slide out and just try to hold it for the corner. non turbos struggle at QR though, mines screaming its tits off in 2nd but doesnt like 3rd. wish i had decent steer tyres though.

Was on semi-slicks, so I needed the rain as the tired old 97rwkw needed all the help (and revs) it could get! :(

drifty1km3.jpg

drifty2zf7.jpg

Does it on gravel most weekends tho :)

tmcc257fz2.jpg

New motor on the way for more N/A POWA!!!

Edited by screamin'
  • 2 weeks later...

Yeah the tape on the headlights means when you do tap something the glass doesn't fall out onto the track.

Also saves your lights from being broken by random stones.

baron - yup, it's primarily a gravel rallycar. Still need to do a bit more work to make it hook up on the loose stuff, but it is a hell of a lot of fun!

Id love to have a car like yours screamin!

You must have a fair few club events over there if most weekends? dam thats good!

*gets naughty thoughts of doing something similar to the r31 daily....*

agreed, nothing like a dirty filthy thrash car for rallies and motorkhanas

It is a lot of fun. I keep the roadcar way too mint to drive on gravel roads or compete @ 100% so I had to get another one for that purpose.

As far as gravel rallycars go it's in really quite mint condition! :)

And yip, most weekends there is a sprint or hilclimb on. When they aren't on there is alway trackdays

(like yesterday :) )

sliideslidingmh6.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...