Jump to content
SAU Community

Wreaked - R33 Gts (1995 S1) $1500

MSPEC
 Share

Recommended Posts

MSPEC Mentor

MSPEC

Posted
Posted (edited)

I have an R33 GTS that has been written off due to being t-boned. Although the car is not worth getting fixed the damage is not actually that extreme and only the rear quarter panel and suspension has been taken out. All the rims are still okay and everything else inside and out are in good condition.

The car has done 128000ks and the engine is in perfect working order, as is the gearbox. All gears work perfectly. This is an ideal buy for someone needing parts!!! Comes with everything except for the dash. All I want it $2000, the gearbox and engine are worth well over that alone.

Anyway looking at $2000 ono for the entire car as is. The deal is you have to come and pick the car up which will require you to tow it away. I do not have the time to remove the engine or gearbox so I am just selling the entire car for $2500 ono!

Location: Upper Beaconsfield, Melbourne

http://www.skylinesaustralia.com/forums/in...t&id=130300

http://www.skylinesaustralia.com/forums/in...t&id=130302

http://www.skylinesaustralia.com/forums/in...t&id=130303

Edited by MSPEC
Link to comment
https://www.sau.com.au/forums/topic/202827-wreaked-r33-gts-1995-s1-1500/
Share on other sites
PWND Grand Master

PWND

Posted
Posted

far out i wish you were in brisbane. exactly what i am looking for. if you have any means of having this sent up to brisbane, pm me or give me a call on 0403 437 653 and i will take it off your hands.

  • 3 weeks later...
MSPEC Mentor

MSPEC

Posted
  • Author
Posted
wonderin if u have the diff still n if ur willing to sell that. pm me

Dont think the quality of the diff is that good so I wouldn't bother. Plus I do not have time to sell parts I just want to get rid of the entire car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...