Jump to content
SAU Community

Recommended Posts

Hey people, just cleaning out the garage. all items located in Melbourne inner north. prefer local pickup. I'll consider posting on the smaller items if buyer pays postage.

all prices neg, but please no silly offers.

Item: R33 GTR style front bar with custom indicators. black

Age: ~1 year

Condition: very good, small crack can be fixed

Price: $300

To Fit: R33 gts/t

Item: R33 GTS-t discs and pads (front and rear)

Age: unsure

Condition: discs still have some meat need machining, pads are about 50% i'd say

Price: $200

To Fit: R33 + maybe some others, you guys might know better than me

Item: R33 GTS-t front and rear sway bar (complete with fittings)

Age: off a 96 s2

Condition: perfect condition. upgraded so need to go

Price: $100 each

To Fit: R33

Item: nismo stripes sticker kit

Age: new

Condition: perfect, still rolled up never used. I bought this for my car but the colour scheme (red black silver) does not suit a black car. best on white or silver car

Price: SOLD

To Fit: r32, r33, r34, s13, s14, s15, camry, whatever.

Item: R33 GTS-t suspension. springs & shocks (front and rear)

Age: off a 96 s2

Condition: shocks are pretty worn. springs are fine

Price: SOLD

To Fit: R33

Item: R33 GTS-t original nissan front + rear speakers plus double din nissan cd + tape head unit (all clarion)

Age: off a 96 s2

Condition: all works fine

Price: $150

To Fit: heaps of cars

Item: 3" decat pipe (black)

Age: was only on car for 1 week

Condition: virtually brand new. excellent condition

Price: $80

To Fit: R32, R33 + perhaps others

Item: standard compliance R33 cat

Age: used for about 6 months

Condition: excellent condition. no damage whatsoever still clean and straight on the inside

Price: $150

To Fit: R32, R33 + perhaps others

Item: apex'i SAFC 2

Age: only on car for a few months

Condition: as new (still has clear plastic sticker over face)

Price: SOLD

To Fit: skylines, silvia plus many more

Item: r34 smic

Condition: excellent. couple of bent fins easily fixed

Price: $200

To Fit: r33/34 straight bolt on. r32 slight modification.

post-35909-1203135953_thumb.jpg

post-35909-1203136184_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/203051-garage-sale/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

bump

im now considering interstate offers on easy to ship items: safc2, r34 smic, r33 smic, cat, decat pipe.

bigger items still melbourne only.

offers, picture requests, questions please post here or pm

Link to comment
https://www.sau.com.au/forums/topic/203051-garage-sale/#findComment-3697016
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...