Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Yer thats wat i thought

He never decibel tested it but im guessin it would be very close to the limit

He just decided he would make me lose a point and a $75 fine afta lookin at it

if you have ANY part that isn't standard on your car, then technically you need a mod plate

it might be legal (as in under 90dB) but you need an engineer to prove this

most don't bother but if you got done then unfortunately they are within their rights

So i do need a mod plate

Thats pretty shit

Well i bought the car off a fairly reputable dealership and u think that u wouldnt be able to get a roadworthy without one (Obviously some fairly easy ways around this tho)

Thx For all your help guys!

A simply rule of thumb for you;

If the car comes standard with a item and you replace it with a "better" or "different" item you do not require a mod plate.

For instance i put a high mount turbo on my r33 when i had it, and no i didnt need a modplate as he car was factory fitted with a turbo. I was simplly changing it for a "better" aftermarket item, and i still included all anti-polution items required to make it 100% legal...

So in short no you do not need a mod plate for an exhaust at all.

As for legality of the exhaust all you need to watch out for it that at the lowest point it is more than 100mm off the ground and that it is not over 90db and you'll be fine...

Yer thats exactly what i thought

But the police make the decisions and from what ive seen and heard they almost always final

Just gotta get on with life and accept the responsibilty/Bad reputation of owning a skyline

STILL WORTH IT THO!

Well my understanding was depends on which law they are reading, and thier personal interperatation of that law.

Either way the system needs sorting out so its the same for all states, with one interperatation.

A simply rule of thumb for you;

If the car comes standard with a item and you replace it with a "better" or "different" item you do not require a mod plate.

For instance i put a high mount turbo on my r33 when i had it, and no i didnt need a modplate as he car was factory fitted with a turbo. I was simplly changing it for a "better" aftermarket item, and i still included all anti-polution items required to make it 100% legal...

So in short no you do not need a mod plate for an exhaust at all.

As for legality of the exhaust all you need to watch out for it that at the lowest point it is more than 100mm off the ground and that it is not over 90db and you'll be fine...

That was my understanding, something like changing your exhaust falls under the "light modification" rules for queensland transport. Only the "heavy modification" like engine/transmission swaps, changes to safety features (e.g. cages) etc etc required mod plates.

Unfortunately then there's the new police rules which don't seem to coincide and leave people wondering/fined etc.

go to court.

the actual fine should read "modifying a silencing device so as to reduce it's effectivnes"

probably worth a try arguing that it's purpose is to keep the car below the set legal limit, and that it still does that so it is in fact not reducing it's effectivness.

was it a traffic cop?

better chance if it was as most magistrates don't really seem to like traffic cops.

Another way to think of it;

Ok, so a car has an OEM exhaust from new, you drive said car for 5-6 years and it starts to devolp an exhaust leak.

So you take the car to an exhaust shop and simplly say fix it, so they then find there is a rust hole in the muffler and say no worries we will put a new muffler on.

If one were to need a mod plate, technically this person above would require one too. As no exhaust shop puts in OEM parts even when simplly replacing a dodgey muffler.

Hence requiring a mod plate for an exhaust is not true, as almost every car thats more than 10 years old would have had some form of exhaust mod made, and if a car were 15+ years old the entire exhaust would have probablly been replaced at some stage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...