Jump to content
SAU Community

Recommended Posts

Just the one in the internal splitter mentioned in the first post.

I'll send you a pm later on with price and a pic if you'd like when i get home

Just some info for everyone..

I run the same manifold and they are excellent. Mine also has the crack in the internal splitter web. It was there when I bought it (2nd hand) and I checked it (after about 25,000 kms of use) about 3-4 months ago (fitted GT3076R) and it had not grown or changed at all..

It must be a common thing with this casting as the web is very thin..the rest of the manifold is very heavy wall and I cant see how the crack on mine could grow anymore...esp in Cast Iron

So what I am saying is dont worry about the crack...

And no I am not a friend of "BHDave"...

interested in the turbo mate you willing to ship to WA

i'll need the wastegate to run it on my rb20 won't I

Gday mate,

I can post to WA, send me a pm and we'll chat.

Yep, you'd need a wastegate to run it as it isn't internally gated

cheers

Dave

Just thought I'd give some input on the T300 as not many people have heard of it.

I run one on my SR and it's a great turbo. Comes on strong and made 242rwkw's on 1.4Bar on a bog stock engine.

Good luck with the sale mate.

Dane

sh1tvers....where was my mind a month ago? woulda bought the whole setup off ya for my 25...ugg.....any idea on how much the T300 is brand new? wana weigh up cost of that plus everything else u got here and whether it fits my budget :turned:

I don't know that they are still available new.

In your case i'd be inclined to get a current gen 3071 or 3076 for around $1800-2000 as the t300 is pretty old tech. Worked brilliantly for what it was though. You may be able to pick up a similar spec t3/4 for a lot less than the current gen gear but i'd have no idea on a price.

  • 2 weeks later...
  • 1 month later...

bump, and price drop, $450 delivery extra

what the hell happened to the edit button in my old posts! can't change the thread title!

Edited by BHDave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...