Jump to content
SAU Community

Turbo Power Loss At 5000

fighterjet33

By fighterjet33,
in Engines & Forced Induction

 Share

Recommended Posts

GTR-32U Mentor

GTR-32U

Posted
Posted
I have been running my R33 on 14 pound, just recently, when I accelerate it dips, loses its push at about 5000 revs and up, anyone know why this is occuring?

Could it possibly be your inlet pipe sucking closed ? No blockage on the filter/airbox ? ...I would be more than willing to bet its your inlet pipe sucking closed under the load.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Have you even tried to search?

Basic R33 GTS-t 101

1. You shouldnt be running 14psi, it will kill your turbo

2. If you dont have management, and have increased boost, the stock ECU will have a fit - get a tune.

3. Could be a dozen other things like AFM pipe, fuel pump, blocked filter and a dozen other things.

I suggest you read the Forced Induction guide (its a sticky), it covers all the basic knowledge questions, problems and fixes

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...