Jump to content
SAU Community

Recommended Posts

hey,

as you can tell im new here. i was wondering if i could have some help, i was wondering if anyone knows how much a set of 4 R32 rims are worth if they had new tyres and no gutter marks?

they look like the ones below

altho arn't the exact rims.

3164245.jpg

Edited by kurtleyo
Link to comment
https://www.sau.com.au/forums/topic/204358-question-about-nissan-r32-rims/
Share on other sites

Not a lot

A few hundred at the most

Really they're common as so there's no big demand for them

Id sell them for whatever the tyres were worth (if they're brand new) plus $100 for the rims

^^Funny you should say... I always thought the R32 Stock rims where rare... Cuz everyones pretty much got aftermarket wheels, the stock ones become abit of a collectors item or no where to be seen.

Hmmm...

Always hard to find when you want to find a set but when you want to sell one off no one wants to buy it or pay what you want.

Pretty much just worth what the tires are worth.

Rims are cheap these days, not a lot of demand for stock wheels now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...