Jump to content
SAU Community

Recommended Posts

like most of the standard steering wheels ive seen in skylines mine is begining to fray and fall apart.

No longer do i have the shinny glossy black look and one side of the steering wheel is starting to crack and rip apart.

so.. need a new one. i was looking into getting an after market one, a decent brand but not too expensive (basically a step above the autotechnica junk found at Autobahn and the likes.

what places around Melb and brands do people reccomend???. Looking at getting just a simple nice black one.

Also i understand ill need a boss kit? and i have an airbag. so from changing from stock to an aftermarket wheel (with no bag) are there any issues with hicas or the removal of the airbag???

any help and point in the right direction would be great

cheers

Link to comment
https://www.sau.com.au/forums/topic/204668-new-steering-wheel-needed/
Share on other sites

hmm.. anyone?? im sure most have after market wheels and had to install them? maybe if mods could move it into a more general section like cosmetic or sky discussion. maybe id have better luck there. thanks

cheers

Edited by jake33
why dont you get an airbag steeringwheel? costs more but would be worth it really. airbags save lives u know :stupid:

And gives nice black eyes. Bloody hell they hurt I tell you. Been hit by a passanger side one, had a black eye for a good 3 weeks, including constant headaches and dizyness. Ive now got a permanent shadow under the eye that copped the impact. But who knows what may have happened without it.

Mine is cactus as well... worn completely through... just ordered a Nardi Deep Cone from Greenline.jp and a Daikei boss kit... you just have to make sure to purchase the boss kit for an airbag wheel... Greenline don't have any of the Nardi wheels on their site but they can order them for you if you know what you want

Nardi is Italian like Momo, but I think they have a better range if your after something simple... I don't like the fighter plane style wheels with all the crap on them so Nardi for me... bit on the pricey side tho

why dont you get an airbag steeringwheel? costs more but would be worth it really. airbags save lives u know :ermm:

ha yeah apparently they do save lives :banana: . i would but had a bit of trouble sourcing one in mint condition.

plus i would like to go aftermarket

aware of Nardi and Momo, any other ok brands out there?? or good distributers in Melb that anyone recommends?

thanks

ah f**k it. im pretty sure ill need one with an airbag for insurance purposes anyway.

so im on the look out for a S1 or S2 steering wheel if anyones got one or knows anyone selling. shoot me a PM. otherwise ill keep my eyes peeled.

thanks for the help people

cheers

Series 1 R33's dont come with airbags from memory, but yours is a series 1, so now im damn confused.

I thought that Airbags and ABS were introduced with series 2 R33's.

I must be wrong though.

some late series 1 had driver side airbags... no passenger airbag

Jake try Just Jap too... they have their own range of steering wheels at a much lower cost than Nardi, Momo etc but I have never held one so not sure of the quality... maybe someone who has one can comment

If you decide to get an aftermarket wheel make sure you get a HICAS Boss if your car has HICAS or you can modify a non HICAS boss like i did.

Yes its true about insurance but if you had an accident you can just put the old wheel back on before the insurance guys inspect the car ..

Edited by Mick

ah k thanks for the info guys. yeah its a late model 95 (so 1.5..whatever people reffer to it as ) S1. just got the airbag on the drivers side.

i think ill try source a S2 airbag wheel. will be a direct fit and is the install easy??

thanks for your help guys

  • 2 months later...

A couple of things to be aware of....having a non-airbag wheel on a car that came with an airbag is defectable. Also aftermarket airbag wheels are mega $$'s.

You could always get your original S1 wheel recovered...

yeah tezflow. i left the window down in my garage one night and the cold air made it all crack and start to flake more and wear away. (nothing really wrong with it..just LOOKS horrible)

i was thinking of getting it re-covered. but then that means i cant drive the car until it gets re-covered. unless i buy another temp steering wheel. :P anyone recommendany places, prices????

i was looking at my step dads 07 nivara 4x4 wheel.. i might have to convice him to go aftermarket... :D

but seriously, if anyone has a spare r33 airbag wheel they want to palm off (or non airbag.. i might be intrested). PM me!!

not really looking at spending like 200 or 300 just for a second hand wheel, so if anyones feeling generous..lemme know :P

i was thinking of getting it re-covered. but then that means i cant drive the car until it gets re-covered. unless i buy another temp steering wheel. anyone recommendany places, prices????

I had my old gtst one recovered...dropped the car off before work and picked it up after as there is a train station right next door. I went to garry blackman trimming in richmond and cost me a couple of hundred (was a while ago so would be useless posting the cost as I'm sure its changed).

Recovered steering wheel (and I had the handbrake and shifter boot replaced as well):

post-6243-1208294977_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...