Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

OK they are going to run private practice tomorrow, but today's event/booking was cancelled because the track had too much standing water.

I'll call at 8am tomorrow to confirm if its on, anyone else wanting to come along should do the same

4646 1004.

Will be out there for sure if its open.

OK they are going to run private practice tomorrow, but today's event/booking was cancelled because the track had too much standing water.

I'll call at 8am tomorrow to confirm if its on, anyone else wanting to come along should do the same

4646 1004.

Will be out there for sure if its open.

Hmm could do, want to see what my new suspension feels like..

Was really wet last weekend out there, but loads of fun :thumbsup:

sunday not sat you gooases

or geese

whattever

anyway. like i said,,,, if they are running the day tomororw ui am there

key s are hard to get right when you drikn.

edge i can vouhc for yo if you head along i will be tthere. but call them in the morning becayuse they callrd today off due to astanding water on the track - its a LONG WAY TO GO TO FIND THE DAY ISNT ON opps caps lokc




  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...