Jump to content
SAU Community

Recommended Posts

i have just removed the driver side rotor/hub. i know a little about shoes. but a little is all i know. i noticed that the right side shoe is missing a screw and spring to hold it in place. i found the spring but not the screw. can i buy the springs separatly or will i have to shell out for a whole new kit? the pic where my finger is pointing at the hole is where the spring and screw should be. the shoe just wobbles everywhere without it.

also can i adjust the shoes out a little more, by using what looks to be the adjuster? its at the very bottom! you cant see it in the pics though.

and is there enough meat left on them?

if you want me to take a few more pics of them then i can :thumbsup:

Craig.

for r33gtst

115.jpg

113.jpg

Link to comment
https://www.sau.com.au/forums/topic/205221-handbrake-brake-shoes/
Share on other sites

i see what your saying. and yes i am getting into drifting. uras are not cheap either. i read they are $212 a set. i might just buy a brand new set of OEM ones.

i noticed that all of the brand new shoe kits dont come with the springs to afix them. i have to use the old parts. which leads me to beleive that all springs and screw components can be bought separatly.

they do look pretty though

post-9092-1156868680.jpg

yeah they work 1000% better than oem.... its the main reason the japs dont use hydraulic handbrakes... the uras and kazama shoes are the best solution. when you consider the cost of a hydraulic handbrake and a set of shoes that do the same job.... they start to look very cheap :yes:

im sure they do.

your options are:-

* nissan genuine

* Going to a clutch and brake specialist and give them your shoes to bond new pads onto them. if u do this ask them if they can re-bond them with performance pads in mind.

* i should think that they are out there aftermarket for r34 i cant see why not. id imagine that they could be the same as the r33. look arround. throw URAS a pm.

im putting mine back in today. should be fun :huh: as ive never done it before.

URAS,

how do the uras ones compare to project mu?

and whats the price for a set for r33?

The old yelloe type were the same material as the Project MU, but the new black URAS shoes are 10 times better. The new material was developed in D1GP by guys using upwards of 275 section semi slick tyres. Not to be confuse this with a sales speil but we offer money back garantee on all our pads/shoes we are that confident in them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...