Jump to content
SAU Community

What Injectors Are You Using On Your Rb20det

allthewaytotheskyline
 Share

Recommended Posts

RaZ_TuRbO Community Regular

RaZ_TuRbO

Posted
Posted

FOG35, i made similar to you 260rwhp(195rwkw?) on 15 psi. But realistically, im after 300rwhp on 18-20psi, dont think a fuel reg is going to get me there, i think it will be sorted with fpr, gtr inject (already got a gtr pump).

raZ1911 Proficient

raZ1911

Posted
Posted
raZ1911 - yes a bad thing.

The computer will be firing the injectors at the same pulse width for all the injectors, so two larger injectors are going to let more fuel through in the same amount of time.

If there were such an ECU that could control individual injector pulse width - (MOTEC maybe?) tuning the thing would be a nightmare - you would want to be monitoring Air/Fuel ratios out of each individual cylinder to ensure everything was good.

oops should of made myself more clear i ment if you had say 800cc ones on a motor that doesnt NEED that much would it still do something? or should you just stick with only whats needed?

paulR32gtr Mentor

paulR32gtr

Posted
Posted

Ahh gotcha! You should choose injectors that match your application.

If they are too large you loose resolution at low pulse width - so your tuner will not be able to set the motor up to run as smoothly / efficiently at lower revs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • WMDC35
      R34 engine swap Rb25de neo to s1 Rb25det

      By WMDC35 · Posted

      If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • GTSBoy
      R34 engine swap Rb25de neo to s1 Rb25det

      By GTSBoy · Posted

      THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • GTSBoy
      Factory oil temp sensor in a RS4V without gauges?

      By GTSBoy · Posted

      Light should be a pressure switch, not a sensor.
    • Duncan
      Factory oil temp sensor in a RS4V without gauges?

      By Duncan · Posted

      The pressure light likely has a different sender to a pressure gauge, its been too long for me to remember for sure. Just have a look for another sender down near the oil filter. If you are confident in your rewired pressure sender reading correctly, you can be pretty sure it is just the dash light's sender failing, it is a pretty common thing.
    • Duncan
      C34 RSFour V Build in the US

      By Duncan · Posted

      It would be nice to see the result, but instagram is a click too far
×
×
  • Create New...