Jump to content
SAU Community

Recommended Posts

hello peoples, i have a r32 turbo im my rb25 r33 gtst. i have had problems with my air flow meter so i used one off my mates he has a r32 gtst and my car flew. so i went to get a new air flow meter today and every r33 one a tryed was no good so i got a r32 gtst air flow meter now the car runs fine is my problem that i have a r32 turbo on a rb25 motor and thats why it dont like the r33 air flow meter????

thanks

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

this will depend on what motor you have

if your car came with stock pink label AFM its series 2 and you can only use series 2 (pink afm's)

if its blue or green then its a series 1 engine and you can use r32 AFM fine (as its the same unit)

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3638355
Share on other sites

no im not using series 2 as ino there pink i have just been trying green label ones and the only one that works is the r32 gtst afm that has 4 gold pins not 5

and no the power is the same if not better coz this turbo spools up quicker lol so ur comment sucks

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3638713
Share on other sites

this will depend on what motor you have

if your car came with stock pink label AFM its series 2 and you can only use series 2 (pink afm's)

if its blue or green then its a series 1 engine and you can use r32 AFM fine (as its the same unit)

do you no if the blue label air flow meters have 5 gold pins for the plug or 4 like a r32 one's do.

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3638715
Share on other sites

no im not using series 2 as ino there pink i have just been trying green label ones and the only one that works is the r32 gtst afm that has 4 gold pins not 5

and no the power is the same if not better coz this turbo spools up quicker lol so ur comment sucks

My comment doesn't suck, I would imagine it has very SIMILAR spooling characteristics as my engine. Yes it may spool quicker but it will choke top end.

Also how do you figure that a turbo that flows LESS air will make MORE power??

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3639494
Share on other sites

no im not using series 2 as ino there pink i have just been trying green label ones and the only one that works is the r32 gtst afm that has 4 gold pins not 5

and no the power is the same if not better coz this turbo spools up quicker lol so ur comment sucks

Big talk for someone asking for help...

And bubba is right...power will be lower as the r32 turbo is smaller and flows less...and it will choke alot quicker than a r33 turbo...i think what you are trying to say is boost response is better...

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3639552
Share on other sites

this will depend on what motor you have

if your car came with stock pink label AFM its series 2 and you can only use series 2 (pink afm's)

if its blue or green then its a series 1 engine

hmm... i have a S1 r33 and i have a pink afm???

works great. its a 95 model (so 1.5 or whatever..) but i know the 95(1.5) model doesnt have a s2 engine.

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3640728
Share on other sites

hmm... i have a S1 r33 and i have a pink afm???

works great. its a 95 model (so 1.5 or whatever..) but i know the 95(1.5) model doesnt have a s2 engine.

someone has changed your afm plug to a series 2 one...for some reason

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3640817
Share on other sites

i never said it was better, it makes the same power and everyone has told me r32 turbo is the same as r33 i dunno if thats right or not, but this car dont choke i dont have dino sheet but what ever a stock r33 would run with a front mount on 10psi im telling you it flys past a stock r33 as i beat one the other day he did the whole turning right thing after it lol

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3641657
Share on other sites

yeah a 32 turbo and 33 are very different.

its hard to measure and come to a conclusion that it would be quicker than a stock 33 simply because you 'raced' one on the street.

- he might not have been giving it as much

- missed a gear

- didnt know he was racing you

- or been a real shit driver

many factors..

just out of curiosity, how come you have a 32 turbo on a 33 anyway?

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3641925
Share on other sites

and no the power is the same if not better

-same engine

-one has a larger turbo than the other

and you think it would be the same if not better, with the smaller turbo?

unless you have other hidden modifications that you are unaware of or its high flowed or something. i dont see how you could conclude this.

chuck it on a dyno and see what it makes i reckon :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3641926
Share on other sites

The turbo is going to make roughly the same power regardless of what engine it is on, larger capacity will just make the power earlier.

So, like I said, 160rwkw @ 4600rpm. Put a 33 turbo back on there and I bet you'll make ~180rwkw @ ~6000rpm.

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3642196
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...