Jump to content
SAU Community

Recommended Posts

Hi,

As the topic states, i need to know the capacity of an RB25 GTST gearbox. I was told to fill it with Repsol 75/90 fully synthetic oil by my gearbox guy. Ive already put 3 litres of oil and 250ml of Nulon friction reducer stuff into the box. I thought the capacity was 2.8 litres. Hope im not filling up something else, lol.

Shaun.

Its just under 3.8 litres. I filled up mine with one US gallon (3.8 litres) of Redline. I had a bit left in the bottle afterwards. So if ur around that amount you should be fine :banana:

Thanks for your replies.

So do you reckon i should get another litre of oil? Ive got 3.2 litres in it at the moment.

When i put my finger in the filler hole in the side of the gearbox, i can feel that the oil is just below the filler hole (maybe 2 or 3 mm below).

I suspect i should do it properly.

By the way, is Redline oil tha shizzle? How much is it?

Shaun.

erm, thats really up to you. Probably could put a few mls in there but whether it would make a difference i wouldnt know =/

Opinions about the Redline oil is pretty divided. I found that it improved my gearbox, while some people find that it doesnt. It cost me 120$ for 1 gallon. (3.8 litre)

the diff and box should always be filled up to capacity and underfilled...

What do you mean by "and underfilled"?

Anyway, i bought another litre and filled it up to capacity. It took about 3.65 litres.

Shaun.

Its been a while since ive done my gearbox but isn't kinda hard to over fill it? I though capacity was when it reaches the filler hole making it impossible to overfill... unless your cars jacked up on some crazy angle?

Its been a while since ive done my gearbox but isn't kinda hard to over fill it? I though capacity was when it reaches the filler hole making it impossible to overfill... unless your cars jacked up on some crazy angle?

yeah theres two ways of overfilling... jacked at an angle like so. or by doing what i do and filling through the shifter hole as its 10 times easier. I make sure that old oil is all drained out and that i put in the exact amount. all good

yeah theres two ways of overfilling... jacked at an angle like so. or by doing what i do and filling through the shifter hole as its 10 times easier. I make sure that old oil is all drained out and that i put in the exact amount. all good

yeah cool that makes sense. had me questioning if i had done something wrong there for a while.

ive found it quite easy just pick up some clear flexible pipe, drop it down near the brake booster and into the filler plug. Wack a funnel on the top and start filling. :huh:

nothing wrong with that either except it takes ages, gear oil is quite thick and takes a while to go through a plastic tube. Ive done it before and heated up the oil in the microwave to thin it out a bit :(

lol thats awesome!

There is a good tutorial for changing your oil http://www.anthonymcgrath.co.uk/gtroc/gear_oil.htm

Its pretty simple , he fills the gearbox through the filler hole with a syringe pump , you must be able to get something like thet in Oz

I used exactly the same pump and it probably is the best way to fill the gearbox.

Just a couple of things..dont suck the oil up with the syringe just undo the cap and fill it up near the top then put the cap back on using a rag.

Also if you put in redline heavy duty shockproof be prepared for a sore shoulder... its like treacle!!

The capacity of a gtst gearbox is 4.1 litres

Edited by petethepom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...