Jump to content
SAU Community

18" Volk Te37 9.5 +12 Swap

Mark0
 Share

Recommended Posts

Mark0 Proficient

Mark0

Posted
Posted

I have Bronze 18" Volk TE37 9.5 +12 with 265/35 with good rubber, I have just bought the wheels only to relize its the wrong offset for my R32 gtr, I have fitted a 245 tyre but it still sticks out to far on the rears, I am trying to make the car legal and Queensland Transport law is the whole rim and tyre need to sit under the guard, Will be perfect for 33 or 34 GTR.

I am keen on the same wheels or CE28n, XD9 or maybe CR Kai let me know if anyone is keen I am after 18" 9" to 9.5" Offset needs to be +18 to +20

Link to comment
https://www.sau.com.au/forums/topic/206050-18-volk-te37-95-12-swap/
Share on other sites
Antimatter Experienced

Antimatter

Posted
Posted

I have a set of dunlop KT26's that have good tread on them if you want to swap. :teehee:

Seriously though - have you tried 255/35's - they have a rolling diameter that is lower than the 245/40's (have been know to fix rubbing issues on that EXACT offset on R32 GTR's)

wrxkilla Mentor

wrxkilla

Posted
Posted

very interested. what price for wheels no tires?

pic would be fantastic for condition etc.

I am in Brisbane and can come see you this weekend if you are keen

Michael

wrxkilla Mentor

wrxkilla

Posted
Posted

hi mate, thanks for pm.

can you post a pic of each rim front on also for condition?

I'm keen to buy em without tires if you name a good price. (you can keep your tires and throw them on your next rims).

Will come down from Brissie and pickup...

cheers

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...