Jump to content
SAU Community

Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by JNR24

Are you runnning GTR-34??

yeh i'll be running, was gonna go pick up the car today but there was a slight problem, hope its going to be fixed tomz as he said he would and will pick it up tomz and friday should be there...THen again that is if nothing goes wrong with the car and the weather..:P

hehe thats alright mate, yeh i saw ur car in the line up, yeh my one is white mate...We didnt get too good times man..Too much wheel spin, the best we did was a 12.3s pass and that was our last one..I even did a 15sec pass hehe, i was still wheel spinning in 3rd gear until the revs dropped and then it went... Well we ordered a set of tires from japan, slickish type ones that should come pretty soon we ran pretty crap times and not what we were looking for.. 12.33s at 116mph, the speeds are good just the take offs getting too much wheel spin..

nah i seriously doubt it gave me more power

it felt very sluggish bottom end and mid way

only notice someing more top end like top of 3rd...

maybe our cars need some sort of back pressure?? not sure man.

but it feels wierd.... when i had da apexi on it... it felt like it went alot hard from da word go..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mount some of these on your dash? https://www.greddy.com/products/16001720  
    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
×
×
  • Create New...