Jump to content
SAU Community

Help With R33 Gtst

Turbo 33

By Turbo 33,
in Engines & Forced Induction

 Share

Recommended Posts

Turbo 33 Proficient

Turbo 33

Posted
  • Author
Posted (edited)
don't speak to Nissan.

Take it to a mechanic.

NOT nissan dealership.

doe sit idle fine when warm on flat ground?

auto or manual?

its manual and idles fine when on flat ground when warm but the reason i thought it is the fuel pump because it ran out of fuel and also shits its self above 4500 rpm is there anyway to check if it is the fuel pump

Edited by CHUCKIE821
Mr_GaZZa Rising Star

Mr_GaZZa

Posted
Posted

hey mate,

not to sure considering ur info... but if its gut less and revs and makes all noise and no go... i'd say pump!

way to test is turn ur key on ACC, listen for ur pump 'should make a humming noise'.

one thing i didnt pickup when mine died.

if all doesnt help mate, take it to dyno place n get them to GET ur Air and Fuel Ratios

=) helps eliminate stuffs

Turbo 33 Proficient

Turbo 33

Posted
  • Author
Posted (edited)
hey mate,

not to sure considering ur info... but if its gut less and revs and makes all noise and no go... i'd say pump!

way to test is turn ur key on ACC, listen for ur pump 'should make a humming noise'.

one thing i didnt pickup when mine died.

if all doesnt help mate, take it to dyno place n get them to GET ur Air and Fuel Ratios

=) helps eliminate stuffs

i can only hear the humming noise when it is switch to on

Edited by CHUCKIE821
4drftn Experienced

4drftn

Posted
Posted

when you say warm do you mean the wheather or when your car warms up?

the wheather causes my car to idle to fluctuate and idle high when the wheather is cold, but when the wheather is hot its pretty much fine...

reason... from what iv been told is that the car was bought and tunned in sydney and bringing it to my neck of the woods where its colder alot of the time causes it to run like it does... has something to do with the denceness of the air, molicules etc.

been told it needs a light tune on the dyno, havent yet got round to doing or atleast get it checked out.

Turbo 33 Proficient

Turbo 33

Posted
  • Author
Posted
when you say warm do you mean the wheather or when your car warms up?

the wheather causes my car to idle to fluctuate and idle high when the wheather is cold, but when the wheather is hot its pretty much fine...

reason... from what iv been told is that the car was bought and tunned in sydney and bringing it to my neck of the woods where its colder alot of the time causes it to run like it does... has something to do with the denceness of the air, molicules etc.

been told it needs a light tune on the dyno, havent yet got round to doing or atleast get it checked out.

when it warms up it idles good but could my fuel pump be stuffed cause it ran out of fuel

Turbo 33 Proficient

Turbo 33

Posted
  • Author
Posted
could be a range of things. like said earlier take it to a mechanic. no one gonna tell ya the problem cos it could be a range of things, especially from what you have explained. also wher u located?

good luck with it all.

brisbane

sl33py Mentor

sl33py

Posted
Posted

#)(#(%) I hate posts like this.

Go to a mechanic.

I'm on another forum where a dude posts "I've got this pain in my chest, what should I do?!?!" I think Darwinism should have taken it's course there but someone told him the appropriate party to visit :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...