Jump to content
SAU Community

Recommended Posts

have 2 of each rim for sale.. 2x Pairs. - NOT COMPLETE SETS OF 4!

First Pair

Volk GT-C Face 2 - Mercury Silver

18x8 +18

High disk clearance still with respectable dish..

Comes with the original boxes, wheel covers & genuine Rays valve caps.

Not a mark on them & In immac condition. Can also provide genuine Rays Nuts & Lock Nuts

Bought brand new from Mu Secret about 2.5 Months ago.. paid about $1750 for the pair!

NO TYRES!

These can fit an S13/14/15 with a bit of camber & some stretched tyres...

$1500 ono

2nd Pair

Rays 57F Pro - Mercury Silver

18x10 +22

Low Disk clearance for High dish

Not a single mark on them.. awesome condition..

Bought from MxFly & they havent even seen my car yet...

NO TYRES

Can fit GTR's, S14's.. S13/14/15's with a little bit of flare or maybe with a whack of camber & some stretched tyres you could fit an S14 without 2 much hassle

Have at least 2.5 - 3 inches dish

Can provide work Wheel nuts for a slight fee if required.

$1500 ono

Buy both pairs & we can work out a package deal possibly to include tyres/Nuts/Locknuts/25mm spacers aswell...

I am semi negotiable but I am not going to accept $1000 for each pair SO DON'T BOTHER ASKING, Not in a rush to sell either..

Can send them anywhere at your expense...

PM or Call - 0402 813 018

post-10679-1203911177_thumb.jpg

post-10679-1203911219_thumb.jpg

post-10679-1203911248_thumb.jpg

Edited by Shypo
Link to comment
https://www.sau.com.au/forums/topic/207624-volk-gt-cs-57f-pros/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...