Jump to content
SAU Community

Recommended Posts

I think it's only a problem for 33s and 34s as they run preload on the clutches or something. That is why you need to drop the driveshaft to put them on 2wd dynos..

Exactly right, 32's dont have any preload on the clutches so you can just pop the fuse out and away you go. The only thing you will be damaging is your tires...

Link to comment
https://www.sau.com.au/forums/topic/207910-r32-gtr-2wd/#findComment-3679928
Share on other sites

you ever broken one russ? ours has never died over the years, even after targa when we had the high speed off road excursion when the castor rod broke.

btw you can see godzilla smiling in the rear window in that pic

Link to comment
https://www.sau.com.au/forums/topic/207910-r32-gtr-2wd/#findComment-3686218
Share on other sites

classic!! somehow i think targa with you boys would be pretty funny!

yeah ours failed in the black 32 played up really weird too, only sending 4wd forward when it felt like it,

Edited by giant
Link to comment
https://www.sau.com.au/forums/topic/207910-r32-gtr-2wd/#findComment-3686231
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...