Jump to content
SAU Community

Recommended Posts

Directed at the driver of Black R33 GTST Rego SKR-033

Mate,

Before you get behind the drivers wheel again think about what you are doing, The display of stupidity that you put on tonight from the Salisbury Hwy to Past the Hospital in Elizabeth was completely retarded!

Not only do you have an exhaust that you could no doubt hear from km away you decided to become a race car driver and weave in and out of traffic, AND you decided to attempt to drift it while doing this. PLUS you were doing stupid speeds and overtaking cars where it was clearly not safe to do so, then to top it all off, going past a hospital you see people on the side of the road so you show off and "hang it sideways"!! Did you even see the 2 or 3 children on the next corner? They could have stepped out? But no that didnt stop you, you continued to speed, i mean you must have been doing more than 100 in a 50zone to disappear into the distance. Grow some brains mate, its not just you on the road, and because you choose to do this in a skyline you affect us enthusists as well, we do the right thing and dont attract attention, but because of idiots like you we all get labeled HOONS!

If anyone knows this tossa, knock some sense into him!

I also noticed that you have the car for sale..... good luck i say!

Hope you have fun when the Police come knocking at your door soon!

There is a time and a place for stupidity, and its not during heavy traffic and not on public roads!

/end rant

J

Mods if you feel the need to remove, do so, i just wanted to express my frustration!

Link to comment
https://www.sau.com.au/forums/topic/208180-attn-black-r33gtst-owner/
Share on other sites

Directed at the driver of Black R33 GTST Rego SKR-033

Mods if you feel the need to remove, do so, i just wanted to express my frustration!

Congratulations for giving police more ammo against us.

Pretty soon none of us will be driving skylines.

Don't remove this mods......'name and shame' is probably the only way to teach this clown.

I agree shame the fool,

Its dickheads like that why Import owners get pulled over and harassed / defected and pay high insurance.

Fair enough If he wants to have some fun, but atleast he could choose a more appropriate location / time to do it when he isn't putting others at risk.

I hope with skylines getting cheaper and cheaper they dont end up like old commonwhores and the reputation they have with dickhead drivers :thumbsup:

maybe we should all give the guy a few prank calls :D

i thought of that as well when i saw the carsale ad

Name David

Suburb Hillbank

State South Australia

Post Code 5112

Mobile Phone 0404872462

feel free to call David anytime after midnight if u cant sleep, wake him up with you

good god, the story gets worse... its Auto :(

... No dis-respect to anyone on SAU who has an auto skyline :(

*kicks benny_blanco in the balls*

AAAAUUUTTTTOOOOO!!!!!!

from someone who went from manual to auto, its alot easier to drink and eat while driving haha

oh, and to you SKR033--------- :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...