Jump to content
SAU Community

Fs: Gojira 480rwkw R32 Gtr Skyline


Recommended Posts

  • 1 month later...
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Hey man,

excellant car man just a few questions :

why the different duration cams ? HKS Step 2 camshafts IN272 EX264

also have you tried the twins instead of the single? what result did it yield?

ie was the car more responsive? top end etc etc

cheers

rob

Can swap the T-88 turbo setup for Twin HKS 2530's if buyer prefers.
Link to comment
Share on other sites

Hey man,

excellant car man just a few questions :

why the different duration cams ? HKS Step 2 camshafts IN272 EX264

also have you tried the twins instead of the single? what result did it yield?

ie was the car more responsive? top end etc etc

cheers

rob

The car had the cams when i brought it from Japan and i've had no reason to change them.

I haven't tried the twins on my car but would expect heaps more response, especially down low. Peak power wise it would be down but should still be good for around 400rwkw. I'm basing this on a mates gtr with the same turbos but less suppporting mods. Hope that helps, any more questions feel free to give me a buzz to chat.

Cheers,

Trsitan

Link to comment
Share on other sites

Hey tristan i'm flying up to tully on monday for work then driving back down the coast for some site inspections so i'm give you a call prob monday and see if we can organise i time on wednesday arvo or thursday morning to have a look at the car. cheers Mick..

Too easy bud, wednesday or thursday arvo would be best as i'll on morning shifts for work.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • 6.3-8.3nm....pretty damn light those fine m6 threads in the aluminium retainer plate are very easy to strip
    • What are the torque specs for those 6 bolts on the retainer plate and 4 oil pan bolts? I'm currently tackling this job during an auto to manual conversion... I thought this would a 5 minute job! 
    • Tryna decide if I should get a skirt coating on my cp 2618 forged pistons that im about to order. Anyone have first hand experience with a forged RB with coated or non coated piston skirts? Is it worth it and does it make much difference? And for people who went with 2618 pistons with no skirt coating how long has your engine lasted? The engine is an rb25/30 and main concern is  that It will be a daily car and will probably see a fair bit of short distance driving, have been told by my machine shop and my tuner that generally a forged engine lasts around 40,000kms before needing a rebuild. Would a skirt coating make much of a difference? cheers 
    • From now on read it as minus 5 and minus 7 instead of dash, and you're correct...
    • Opened up the cluster to inspect the gauge itself for signs of damage and it looks good. Got curious since that needle doesn't go back to a "neutral" position by itself (it stays in the same position when ignition is off. so I manually moved it to 1/2. Connected it back, turned on the ignition and the needle started moving up! Not sure what's up with that but before that the needle was way down below empty like fully south west. There's always a chance that the needle moved slightly the first time I tried and I didn't notice because of how slowly it moves and how far it was from the markings. I don't know if the current needle position is accurate so I'll fill it up and see where that brings it. I guess I'll try to adjust it manually if it doesn't get to F. Looks like the needle position is relative and not absolute? Thanks all for your help and patience!
×
×
  • Create New...