Jump to content
SAU Community

Recommended Posts

it is an aftermarket steering wheel, came with it though and yeh ive had a wheel allignment recently but it has done it since the day i got it... as i said it doesnt seem to affect anything...

i will check the fluids as mentioned above.. see what happens..

if you have aftermarket steering wheel forever, and the light comes on after a while without turning corner, forever, it is almost certainly the steering wheel on crooked.

find a straight flat area, drive a couple of m, take the steering wheel off at the big nut, put it back on straight. should fix the problem - hicas throws an error when your wheel is crooked because it thinks you have been driving in circles for the last 20min

  • 2 weeks later...

how long are u driving in a straight line for?

on the older model's the HICAS ECU picks up that the car is going at speed but because it's in a straight line the ecu get tricked in to thinking that there is no signal or false signal from the steering angle sensor so it turns of the HICAS system to be on the safe side. not a major problem but still a problem. sorry but i can't remember any fixes for the problem. try looking on UK forums they have a lot of straight hiway/roads an i have read that a few people have found a fix for it

hope this helps

well im gunna try what Duncan posted above on the weekend,

but to answer your q neofenrir34 its literally just when im heading along a highway, as an example and im not sure if you know but say if i get on the bruce highway and start heading towards the sunny coast from brissie then within 5mins of driving along the highway the light will come on...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...