Jump to content
SAU Community

Recommended Posts

a mate bought a r33 s2 very clean, standard everything apart from jap catback. it had a nice set of 18s and lowering springs. Went into Mackay Toyota and they offered him $2500 ..... this was right after he bought it for $14k

What a load of anus.

Sell privately. Problem is some ppl are too impatient. Actually a couple of my mates are like that, they'll gladly (and have) lost thousands taking the easy trade-in route.

at one stage i was looking to trade in the r33 for a new mazda mx5 - they offered 10k trade in

the guy said "mate, you might as well sell it for 17k because thats what its probably worth now"

trade ins are for old cars - such as my 1982 civic, 1985 accord and 1988 camira - dont bother with new cars

the guy said "mate, you might as well sell it for 17k because thats what its probably worth now"

I've had a car salesman say the same to me, "mate, honestly, you're better off selling it privately".

What a lovely chap.

I've had a car salesman say the same to me, "mate, honestly, you're better off selling it privately".

What a lovely chap.

ahaha yeah, good to see some honest salesman (somewhat honest anyway) - i obviously ended up keeping the skyline - i keep telling the car every day "i dont ever want to even think of trading you again!"

I'm not defending used car salesmen in any way but what do you expect them to offer you?

They have to sell it with rwc etc after buying it from a most likely young person who in there eyes (there probably right) have thrashed the life out of it. Who knows how much needs to be spent on it to get it right for sale?

When you walk into a car yard to buy a car you want everything perfect. Decent tyres, nice paint, no oil leaks etc etc.

They dont have time or money to have the car inspected to see what issues it might need to get it up to resale worthiness so they offer on worst case scenario. If it needs a whole heap of work done they are ok and if it doesnt then its a bonus.

Like was mentioned they intend to resell and make a profit. Not keep it for themselves. They have to allow to sit on the car if it doesnt sell, pay for mechanical repairs, detailers, advertising,wages,rent,power etc etc etc etc.

How much would car dealers give for a stock R33 GTS-T coupe with 70 K on the clock in trade in?

Had my Skyline for 2 years now... maybe it is about time to move on.

I took my 97 model S2 40th anni edition which i paid $20 thou for, to a yard to be quoted trade in price last year. I was told that i'd be pushing my luck to get 10 thou. My car was perfect condition, everything neat, tidy, perfect mech. yeah.... i was a bit upset.

i was expecting that though, and sold it privately a month or two later for a substantial amount more than that.

Edited by Himself
I took my 97 model S2 40th anni edition which i paid $20 thou for, to a yard to be quoted trade in price last year. I was told that i'd be pushing my luck to get 10 thou. My car was perfect condition, everything neat, tidy, perfect mech. yeah.... i was a bit upset.

i was expecting that though, and sold it privately a month or two later for a substantial amount more than that.

Car dealers trade your car in for 10 thousand and sell it for 19... 9 K profit. Thanks guys... trade in = no way.

i'm note sure what people expect from a trade-in?

the dealer has to maek money, if they buy your car for 15k when you can't even sell it for that much privately, what's in it for them?

the point of a trade-in is that its a car you either can't sell or can't be bothered selling, thus they take it off your hands immediately.

the price you pay is that it costs you

if you desperately want to sell your R33 and have your mind set on 15k, why not advertise it for 13k, bite the bullet, and sell it within a week or 2

Exactly!

If you want top dollar then you need a top car, and you need to be VERY patient. If you want your car gone same day with no fussing about take it to the dealer, and take the loss on the wallet.

Not rocket science.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...