Jump to content
SAU Community

Recommended Posts

Hello all ,

I just thought i would tell you people about The Fast And Furious workshop in Brisbane. I have been reading alot of posts on this web site about aftermarket products , problems with cars , where to buy imported cars and car audio . Well i thought i would let you guys know on a little secret tucked away in the streets of brisbane. The Fast And Furious/F.I.S.T audio company has been around for queit some time now and word is starting to spread but for those who havnt heard here is what we offer.

We sell all of the top manufacturers products such as H.K.S , apex'i , trust , greedy , turbosmart , Blitz and a whole lot more aftermarket products.Anything you want you name it weve got it or we can get it direct from the manufacturers in japan on overnight parts. And for those people out there that love the bass we have a full audio section dedicated to you guys !

We have full workshop capabilities to fit your aftermarket products or your servicing needs. Dont hesitate to come see our friendly staff to help you with all your Skyline needs.

We are the skyline and import specialists!!!!!

The Fast And Furious

1589 Wynnum Rd

Tingalpa 4153

Brisbane , QLD

PH: (07) 33905233

yeah im moving around the corner in wakerley there, I was going to come down with my car on saturday to see what you have, but only went today and washed my car.

I will need a fmic and airpod, so when I have the dosh I'll come and see you if you have the right prices ;)

i just went down there after i dropped a load of shit at my new place. Bits and pieces there and a few cars in there getting done up. few gtr's laying around, looks like they doing them up for some comp work ;)

and $1400-$1500 for a intercooler with polished pipes fitted isnt a bad price eh :) [600x300x79]

Originally posted by Eek Skywalker

Hello,

I may be in need of uni joints and a center bearing for an R33. Do you guys stock these parts? If you do, do you have an approximate price?

Thanks,

Eek

HI eek,

We dont actually stock these parts as we buy direct nissan when needed . If you would like to go any further with this please come in and see us and we can organise it all with you and get it all fixed.

Originally posted by bloody Hoon

just wandering if you the malpassi riseing rate regulater and how much i would be looking at?

Hay hoon ,

I have found out that we can get you a malpassi rising rate regulator for $205 including gst and can get it in whenever you need it.

If you wanted the extra fuel pressure gauge that fits into the regulator it will approx $50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...