Jump to content
SAU Community

The Fast And Furious 4 All Of Your Skyline Needs

Nizmo_81

By Nizmo_81,
in Queensland

 Share

Recommended Posts

Nizmo_81 Contributor

Nizmo_81

Posted
Posted

Hello all ,

I just thought i would tell you people about The Fast And Furious workshop in Brisbane. I have been reading alot of posts on this web site about aftermarket products , problems with cars , where to buy imported cars and car audio . Well i thought i would let you guys know on a little secret tucked away in the streets of brisbane. The Fast And Furious/F.I.S.T audio company has been around for queit some time now and word is starting to spread but for those who havnt heard here is what we offer.

We sell all of the top manufacturers products such as H.K.S , apex'i , trust , greedy , turbosmart , Blitz and a whole lot more aftermarket products.Anything you want you name it weve got it or we can get it direct from the manufacturers in japan on overnight parts. And for those people out there that love the bass we have a full audio section dedicated to you guys !

We have full workshop capabilities to fit your aftermarket products or your servicing needs. Dont hesitate to come see our friendly staff to help you with all your Skyline needs.

We are the skyline and import specialists!!!!!

The Fast And Furious

1589 Wynnum Rd

Tingalpa 4153

Brisbane , QLD

PH: (07) 33905233

Zoix Experienced

Zoix

Posted
Posted

yeah im moving around the corner in wakerley there, I was going to come down with my car on saturday to see what you have, but only went today and washed my car.

I will need a fmic and airpod, so when I have the dosh I'll come and see you if you have the right prices ;)

Zoix Experienced

Zoix

Posted
Posted

i just went down there after i dropped a load of shit at my new place. Bits and pieces there and a few cars in there getting done up. few gtr's laying around, looks like they doing them up for some comp work ;)

and $1400-$1500 for a intercooler with polished pipes fitted isnt a bad price eh :) [600x300x79]

Nizmo_81 Contributor

Nizmo_81

Posted
  • Author
Posted
Originally posted by Eek Skywalker

Hello,

I may be in need of uni joints and a center bearing for an R33. Do you guys stock these parts? If you do, do you have an approximate price?

Thanks,

Eek

HI eek,

We dont actually stock these parts as we buy direct nissan when needed . If you would like to go any further with this please come in and see us and we can organise it all with you and get it all fixed.

Nizmo_81 Contributor

Nizmo_81

Posted
  • Author
Posted
Originally posted by bloody Hoon

just wandering if you the malpassi riseing rate regulater and how much i would be looking at?

Hay hoon ,

I have found out that we can get you a malpassi rising rate regulator for $205 including gst and can get it in whenever you need it.

If you wanted the extra fuel pressure gauge that fits into the regulator it will approx $50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...