Jump to content
SAU Community

Recommended Posts

I hope you learned your lesson not to put yourself and others in a dangerous situation like that even if they are being idiots, last thing we need is

someone to be an idiot with them

Edited by nos man

I ignore them, but still get issues :S

I find it funny to let bogans win at the lights and start laughing to their mates thinking they are top sh*t ;) that way they dont get angry and tailgate or cause damage :D

It must be my week, I had some tosser road raging me today because i was doing the speed limit :thumbsup: If I wasnt driving my mums car at the time but in my pinny wagon I would of slammed my brakes on :)

hey glenn sorry to hear that u ran into some wankers.. but there are plenty out there.... and the vn dunga full of skinheads on my precious gorge rd.... grrr this puts fire in my belly!

neway man this asside hope ur doin well.

:thumbsup: to the nutty fellas on our streets.

peace

it just keeps getting better telling my missus about what happend to glenn when we were driving and not even 5 mins later i had a car load of bogans pull up along side me rev the crap out of you guessed it the old kingswood stockies all round not a straight panel on it they cut in front of me got no further for it swerved back into the other lane speed up and then cut another person off i ended up passing them to which they thought i wanted to drag "dumbarsses "so then it all started again what losers :thumbsup:

the ignore strategy works best. all they are looking for is attention, or a reaction. deny them of this and they'll lose interest.

people who tailgate annoy me no-end, i feel like asking them 'how much time do you think you will make by travelling an inch from my rear bumper'?

lol last friday same thing happened, when i was on little cruz with few ppl from here.

going bak to where we started a vn pulled up nex to us n started revvin it.

also a certain RED VR UTE (lol) was eggin me on at the lites (every single one). only to get beaten lol

next tym matty

hey glenn sorry to hear that u ran into some wankers.. but there are plenty out there.... and the vn dunga full of skinheads on my precious gorge rd.... grrr this puts fire in my belly!

neway man this asside hope ur doin well.

:domokun: to the nutty fellas on our streets.

peace

Yeah im doing well, next time im heading up that way i will have to give you a buzz and take you for a ride.

lol @ Rob's story, what are they thinking in a 2 tonne whale?? :yucky: lucky it wasnt a Roadpacer they were in :rofl:>Mazda Roadpacer<

Edited by benny_blanco
Yeah im doing well, next time im heading up that way i will have to give you a buzz and take you for a ride.

lol @ Rob's story, what are they thinking in a 2 tonne whale?? :domokun: lucky it wasnt a Roadpacer they were in :rofl:>Mazda Roadpacer<

lol is that true about the roadpacer never heard of it i dont know what they were thinking there are alot of "tools" out there i seem to run into a few :yucky:

lol is that true about the roadpacer never heard of it i dont know what they were thinking there are alot of "tools" out there i seem to run into a few :domokun:

if only frag grenades were legal... id carry a 6 pack on the passenger seat for shits n giggles....

-D

lol is that true about the roadpacer never heard of it

Yeah its true unfortunatly for mazda, they also made a rotary bus, i story i heard... at full load it couldnt even go up a hill :domokun:

"aritcle"

Roadpacer + Parkway bus

ive had this crap a bit, a few times i was even driving my dads VN..

ive had some dude with his bogan wife and kids in the back trying to overtake me in the short SLIP LANES on main north

road coming from Gawler... after i had enough and knew he would probably crash i booted it (i was driving my mums

hyundai lantra) i probably hit like 140-150 because he just sat up my arse, when we came up to a clear part of the

road i put on my indicator to move into the lane and as i moved into the lane and they went past his bogan wife

was hanging out the window, from waist to head swearing and yelling at me at like 140-150kmh... :(

got a fair bit of the same crap on RCK cruise.. me and a mate took his EA Falcon on it :P

couldnt help it, we had to..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys, I’m a veteran detailer with years of hands-on experience. I’ll be sharing quick, effective detailing tips to help you keep your Skyline (or any ride) looking its best. Got a question? Fire away!
    • I guess when I say it's a POS I mean.. the solution and the stuff has the capacity for maybe... 1 spot. You know, as a spot cleaner. What I really *want* is the ability to do an entire car, all upholstery, all carpet, mats, all seats, door card inserts, A pillars, roof liners, etc. In one go. I get lured by all the jank that comes out and think "I'd like to be able to clean to that degree"
    • I've got one (not the car one, the domestic spot cleaner one, which is basically the same jobbie) and have driven it hard for hours and hours at a time. Grimy sofas, 6' floor rugs, etc. I'd blame your specific example rather than the whole category. I haven't used mine in the car, because.... you know, it's my car. So there is no-one else's ball sweat in the driver's seat, there's no kid food/drink spills or hand prints inside because they've never had an opportunity to put them there. You know, basic, standard Skyline rules.
    • I normally run with I think a 10mm, and definitely use the second handle you can add to a drill. They hurt when they bins up!   For the crush tube, once all subframe is clear, I'd try some stilsons and see if I can get it to start to twist.
    • Probably because they couldn't, because the use of the variable resistor to create a "signal" in the ECU is managed by the ECU's circuitry. The only way that VDO could do it would be if they made a "smart" sensor that directly created the 0-5V signal itself. And that takes us back to the beginning. Well, in that case, you could do the crude digital (ie, binary, on or off) input that I mentioned before, to at least put a marker on the trace. If you pressed the button only at a series of known integer temperatures, say every 2°C from the start of your range of interest up to whatever you can manage, and you know what temperature the first press was at, then you'd have the voltage marked for all of those temperatures. And you can have more than one shot at it too. You can set the car up to get the oil hot (bypass oil coolers, mask off the air flow to oil coolers, and/or the radiator, to get the whole engine a bit hotter, then give it a bit of curry to get some measurements up near the top of the range.   On the subject of the formula for the data you provided, I did something different to Matt's approach, and got a slightly different linear formula, being Temp = -22.45*V + 118.32. Just a curve fit from Excel using all the points, instead of just throwing it through 2 points. A little more accurate, but not drastically different. Rsquared is only 0.9955 though, which is good but not great. If you could use higher order polynomials in the thingo, then a quadratic fit gives an excellent Rsquared of 0.9994. Temp = 2.1059*V^2 - 34.13*V + 133.27. The funny thing is, though, that I'd probably trust the linear fit more for extrapolation beyond the provided data. The quadratic might get a bit squirrely. Hang on, I'll use the formulae to extend the plots.... It's really big so you can see all the lines. I might have to say that I think I really still prefer the quadratic fit. It looks like the linear fit overstates the temperature in the middle of the input range, and would pretty solidly understate what the likely shape of the real curve would say at both ends.
×
×
  • Create New...