Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Recommended Posts

Also R34 boosted up under 12psi , it will ping at 3600-4400rpm when the accelerator is put down on street.

Because R34 ignition map is 3600-4400rpm very hi ignition timing for Australia fuel.(maybe 100 octane fuel is OK)

I am finding this with R33 S2, 40th anniversary model. Even on standard boost, it will ping if I run 10psi in midrange RPM.

100RON fuel made a big difference, but I can't get it locally.

  • 2 weeks later...

Toshi,

Need a tune badly mate.

Car:

R33 Gtst

Mods:

- Walbro in tank fuel pump

- GCG High Flow

- Front Mount Intercooler

- Spark Plugs Gapped .8mm

- 3inch Turbo Back Exhaust

- Boost Controller

- Apexi Pod Shielded

- Cold Air Intake.

Looking for 230+rwkw.

Am I missing anything here?

Please let me know.

Will book in Dyno tune in next month or two.

Cheers!

RJ.

Toshi,

Need a tune badly mate.

Car:

R33 Gtst

Mods:

- Walbro in tank fuel pump

- GCG High Flow

- Front Mount Intercooler

- Spark Plugs Gapped .8mm

- 3inch Turbo Back Exhaust

- Boost Controller

- Apexi Pod Shielded

- Cold Air Intake.

Looking for 230+rwkw.

Am I missing anything here?

Please let me know.

Will book in Dyno tune in next month or two.

Cheers!

RJ.

I sent PM.

hi,

can you offer generic tuning for "standard" mods ie r33 running FMIC, stock turbo at 12 psi ,3" exhaust with 98 ron.

Just for those of us who do not live near you, we can post you our ecu and have it corrected?

Like a mines spec ecu- better AF ratios over 10 psi, better boost timings, lose the speed limiter etc.

I know it wont be as hard tuned as the ones that you road/dyno tunes better just better then the standard ones.

Lads,

Had my ECU remapped my Toshi today.

Easily the best $500 bucks ive spent in a long long time. Its a rare event for me when i drive away from something genuinely thinking i got my moneys worth. This time its without question.

Toshi spent much of his sunday tuning my car until i was happy, explained every part of the process clearly and kept me completely involved. The car is absolutely flying and i couldnt be happier. His focused attitude and attention to detail was second to none, this was very apparent especially after dealing with peanut after peanut mechanic (and twice the cash) who obviously had no idea.

I strongly recommend his services to anyone. He clearly knows his stuff, and takes the time to do it properly. Pretty bloody rare (and valuable) in my book. Ill take the car nowhere else.

Thanks again Toshi, we will speak soon about the intercooler etc.

Cheers,

Matt

Thank you Mattw_83.

thank you for asking datsfreak.

Sure I do send generic tuned ecu.

What I usually do is,

Firstly I will ask you for a deposit. ($450 for ecu and $200 for deposit)

Then I'll send you the spare tuned ecu that i have.

After making sure you are happy with the tuning, i will ask you to send me your untuned ecu and i will send you back the $200 deposit.

I did samething for robmbt.(and other many custermer)

http://www.skylinesaustralia.com/forums/Re....html&st=80

hi,

can you offer generic tuning for "standard" mods ie r33 running FMIC, stock turbo at 12 psi ,3" exhaust with 98 ron.

Just for those of us who do not live near you, we can post you our ecu and have it corrected?

Like a mines spec ecu- better AF ratios over 10 psi, better boost timings, lose the speed limiter etc.

I know it wont be as hard tuned as the ones that you road/dyno tunes better just better then the standard ones.

Hi Toshi,

What are the potential problems with the generic tune and would it help if I got a dyno graph with AFRs to send you beforehand?

It'd be better if you go to dyno after you recieve the remaped ecu.

Since I cannot site the condition of your car, fitting chip can be potentionally dangerous at full boost.

So I ask customers to go to dyno straight after recieving the ecu to check ignition timing , AFR, ping, etc is fine.

If there are any problems, I will send you another chip.

Hi Toshi,

What are the potential problems with the generic tune and would it help if I got a dyno graph with AFRs to send you beforehand?

I just read what you did for robmbt, he got 200RWKW at 10-11psi from a AUTO.

THATS awesome(its a auto!)! When I get some cash together I will contact you.

Thank you Mattw_83.

thank you for asking datsfreak.

Sure I do send generic tuned ecu.

What I usually do is,

Firstly I will ask you for a deposit. ($450 for ecu and $200 for deposit)

Then I'll send you the spare tuned ecu that i have.

After making sure you are happy with the tuning, i will ask you to send me your untuned ecu and i will send you back the $200 deposit.

I did samething for robmbt.(and other many custermer)

http://www.skylinesaustralia.com/forums/Re....html&st=80

  • 4 weeks later...

I can highly recommend this tune, I just got it done last weekend and the difference is amazing.

The car feels really strong and has absolutely no flat spots, it feels like a whole new car.

I am yet to dyno my car to see how much power it is making but it feels very healthy!

Thanks Toshi!

Edited by da spike

hey toshi, got a question similar to "datsfreak", only difference being, my motor is a RB25DE+T (ie, hi-comp turbo motor)

a list of the mods iv done so far is here, along with a few bits that are on the drawing boards (bigger fuel pump, rising rate regulator, bigger exhaust) as you can probly tell, im building it up to be basically a high comp standard RB25DET motor.

http://www.skylinesaustralia.com/forums/Ig...em-t277719.html

basically why im asking is that i live in western victoria, which would be a good 18-20hour trip from sydney (in that time, anything can break, especially on an untuned car)

would it still be possible for me to send you up my ECU and get a remapped one sent down to suit my highcomp motor? would there be any extra cost involved etc...

i have access to a dyno so yeah...have heard nothing but good things about you mate, theres plenty of other tuners down here in vic/sa, but you seem to give the best bang for buck from what i can tell...

hope you can help me :banana:

hey toshi, got a question similar to "datsfreak", only difference being, my motor is a RB25DE+T (ie, hi-comp turbo motor)

a list of the mods iv done so far is here, along with a few bits that are on the drawing boards (bigger fuel pump, rising rate regulator, bigger exhaust) as you can probly tell, im building it up to be basically a high comp standard RB25DET motor.

http://www.skylinesaustralia.com/forums/Ig...em-t277719.html

basically why im asking is that i live in western victoria, which would be a good 18-20hour trip from sydney (in that time, anything can break, especially on an untuned car)

would it still be possible for me to send you up my ECU and get a remapped one sent down to suit my highcomp motor? would there be any extra cost involved etc...

i have access to a dyno so yeah...have heard nothing but good things about you mate, theres plenty of other tuners down here in vic/sa, but you seem to give the best bang for buck from what i can tell...

hope you can help me :banana:

I can remap.

I remaped his RB25D+T and he got near 180kw.

Also he is living is VIC.

http://www.skylinesaustralia.com/forums/Ad...ml&hl=toshi

Toshi -

Whats it worth if I send you my ECU (R33) to only have the 180k limiter removed and also have the boost/afm cut removed. no tuning or anything needs to be done.

cheers Andrew

Toshi -

Whats it worth if I send you my ECU (R33) to only have the 180k limiter removed and also have the boost/afm cut removed. no tuning or anything needs to be done.

cheers Andrew

I sent PM.

  • 2 weeks later...



  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...