Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Recommended Posts

Hi Toshi,

I recently bought an r33 gtst, mild mods, fmic, turbo back exhaust, CAI, boost. Just after your opinion of whether a remap or an emanage blue would be better for my application.

Also, i am currently getting around 330km from 55 litres of fuel, would your flash tune decrease fuel consumption by much?

Final question, does your remap eliminate the Rich and Retard feature of the standard ECU?

Very keen for this tune once i sort my misfire issue out.

Thanks,

Dave

Edited by Daza33

i have a remap ecu by toshi and he does a great job and would be well worth the dollars.it does elimanate rich and retard and can have ur rev limiter and top speed changed,i would advise u to get a walbro or bosch fuel pump and have it rewired to receive direct current from ur alternator so u receive a constant voltage.also make sure ur boost controller is strong and doesnt spike for best results.toshi is a very helpful guy and will help answer any questions and sort any isssues.if u have the cash id go a nistune

Hi Toshi,

I recently bought an r33 gtst, mild mods, fmic, turbo back exhaust, CAI, boost. Just after your opinion of whether a remap or an emanage blue would be better for my application.

Also, i am currently getting around 330km from 55 litres of fuel, would your flash tune decrease fuel consumption by much?

Final question, does your remap eliminate the Rich and Retard feature of the standard ECU?

Very keen for this tune once i sort my misfire issue out.

Thanks,

Dave

I sent PM.

i have a remap ecu by toshi and he does a great job and would be well worth the dollars.it does elimanate rich and retard and can have ur rev limiter and top speed changed,i would advise u to get a walbro or bosch fuel pump and have it rewired to receive direct current from ur alternator so u receive a constant voltage.also make sure ur boost controller is strong and doesnt spike for best results.toshi is a very helpful guy and will help answer any questions and sort any isssues.if u have the cash id go a nistune

Thank you RB25 SKYLINE

  • 2 weeks later...

Got my mates 200 tuned by Toshi.... just waiting to throw my new turbo setup in before I take my 33 to him...

I also made up some stickers for him to help spread the word.... If anyone wants one give Toshi a call.

Available in a bunch of different colours.

photo2-3.jpg

photo1-1.jpg

Edited by arrydjay
  • 5 weeks later...

heres my dyno results after a toshi tune on a r33,full exhaust,aftermarket fuel pump,FMIC.

post-87182-0-81101500-1339371294_thumb.jpg

post-87182-0-26727800-1339371490_thumb.jpg

is there any way i can get nistune with base map shipped to kl malaysia..pls pm or email me at [email protected]

will gladly provide specs later..

  • 1 month later...

R34 RB25Neo

V-Power 98

16psi

GCG hi flow turbo

Standard internals

3in exhaust + dump

stainless turbo manifold

Apexi front mount Delta type

Z32 air flow meter

Splitfire coils NGK plugs

STD injectors

Walbro fuel pump

Nistune by Toshi

277Kw 500.3FtLb torque

R34GCG277kw.JPG

R33 S2

Unopened RB25 ~100,000km

Hypergear PU Highflow (non SS1)

Blitz return flow FMIC

Splitfire Coils

Metal intake with std airbox

Z32 AFM

S15 480cc injectors

Gizzmo Boost controller

Xtreme Cushion button clutch

R33287kw.JPG

RB25DET

18psi

GCG turbo

RB25 Standard internals

Front mount inter cooler

Z32 air flow meter

Fuel pump

269kw

S13RB25Sss.JPG

R33 Series 2 5spd manual

Stock RB25det series 2 engine

-3" turbo back exhaust

-Hypergear Hiflow 21U housing (R33 turbo hiflow)

-Z32 afm

-Pod filter

-Stock injectors

-Frount mount intercooler

-wolbro fuel pump

Makes 263rwkw on 15psi

R33.21U.260kw1.JPG

RB20 RB26 std cam shaft data

Std RB26 over lap is 0 degrees.(I think for emission control).

Std RB20 over lap is 5 degrees.

Std RB26 cam shaft cam angle ; IN 240 degrees EX 236 degrees

Std RB20 cam shaft cam angle ; IN 240 degrees EX 240 degrees

Adjust cams gear for RB20 and RB26

For make more power

Std cam shaft ; valve timing adjust to around IN 110 degrees EX 115 degrees and adjust over lap to 13-17degrees.

Hi cam shaft valve timing adjust to around IN 110degrees EX 115 and if you do not like rough idle do not adjust over lap over 20 degrees.

Valve timing is depend on hi camshaft and turbo.Find best valve timing is need many times adjust and test so adjust valve timing is take a time for hi cam shaft.

How to adjust valve timing

tomei.camsgear.JPG

It is available to adjust the valve timing and change the engine out put characteristics by change the valve closing timing according to the initial value.

・ Crank pulley left turn(Advance Valve timing)→Low end boost

・ Crank pulley right turn(Delay Valve timing)→High speed gain

Hi Toshi,

If I were to send you an R33 series 1 RB25DE stock ECU, can you modify it with Nistune, to allow a Nistune tuner in victoria to tune my RB25DE+T? The Nistune website doesn't list anything for R33 RB25 and says to either use an R32 RB20DET ECU or a Z32 ECU with modifications?

Cheers, Josh

People mixed up nistune board and nistune software.

Im using nistune software for R33 ecu tune but I do not using nistune board.(Im using daughter board (impoart from Japan) with emulate)

Please read this thread.

http://www.skylinesaustralia.com/forums/topic/405546-r33-ecu-basic-dyno-tune-drive-in-drive-away-only-580-full-road-tune-from-550-include-parts/page__hl__toshi__fromsearch__1

If you want to use nistune board you need Z32 ecu or R32 ecu.

I can send Z32 ecu or R32 ecu with nistune board installed de+T data.

Price $600 include ecu.

Ah ok. It read as if you were able to now Nistune R33 ECU's. $600 plus freight for plug-and-play Z32 ECU for a R33 GTST, that any Nistune tuner can use, correct?

The approach that is taken in Japan for better responses is to change the VCT (NVCS) rpm when a bigger turbo is installed.

However, unfortunately VCT rpm is often not changed here in Australia.

On the mainline dyno, the difference can't be seen too well but on the hub dyno and on the road, there is a significant difference

post-1094-0-82384000-1343547580_thumb.jpg

It may be an idea to give it a try- change VCT rpm yourself

Good Luck

I tuned Mr David Stankowski nissan laurel RB25 DET race car last year and he is driving REPCO PRO DRIFT CHAMPIONSHIP this year.

ECU is real time tuned R33 ecu. (not Z32 with nistune board)

His car mods is FMIC , bigger fuel pump , my tuned ecu , and stock turbo!

Boost 15psi.

David.drift.JPG

David.battle.JPG

http://www.nissansilvia.com/forums/index.php?showtopic=518812&st=0&p=6586278&hl=david%20stankowski&fromsearch=1entry6586278

http://www.youtube.com/watch?v=Vb4kF8O531k

  • Like 1

Some JASMA muffler (made in Japan quiet muffler .eg;quiet NISMO muffler) can not make power.

Because oust side pipe is big but inside is very small for pass registration in Japan.

jasma%20plate.JPG

jasma.muffler.JPG




  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...