Jump to content
SAU Community

Recommended Posts

Well, I have a wedding to attend on Friday and the group I am taking would prefer my new rims to be on before lunchtime then.

My brand new rims have arrived and have got the Federal 595's for them, but we cannot get them on AT ALL!!! Tried one front and one rear, still can't get them on.

Praying that a tyre mob will be able to fit them tomorrow at short notice if i rock up in the morning with them.

They are only 18*9 and 18*8 and the tyres are 265/35s and 225/40s... Not huge or a stretch, just can't get the Federals on.

I doubt many people will read this so late at night, but if anyone knows someone in Fyshwick or Southside at least that has a decent wheel fitting machine that would be able to help out in such a short time, can you please reply here with their details? I'm going to try Discount Tyres, Jax QuickFit and Bob Jane tomorrow morning to see if any of them can get the wheels/tyres fitted ASAP, otherwise, the wedding photos are going to be let down a bit (more to the point, my car won't be featured at front) :-(

Random post I know, sorry, just distressed trying to organise everything in time.....

Cheers

Sam

Link to comment
https://www.sau.com.au/forums/topic/210114-doh-so-close-yet-so-far/
Share on other sites

try a place that does a bit more of the performance wheel and tyres instead of just family car stuff. tiye rollers can do a nice job of your rims in the hands of the right (or wrong) person. TTF the tire factory do a few bigger wheels and tires 21s22s23s upwards and are always a challenge gettin 30profile tires on without damaging rim

hope this helps

brett

Discount tyres and Bob Jane are too expensive.

I don't think there is any place in Canberra that deal with performance wheel and tyres(no market). I have heard there are some careless workers or places that do not have machines that can handle rim sizes larger that 16inch.

Anyway, to my knowledge you can go to:

- Tuggeranong Tyres (used to be Tyre power)

- Jax Quickfit Woden

- Advantage Fyshwick

They are the places I goto, but I take drift rims that don't require care, but I have seen Jax do deal with alot of large bling bling rims.

Go early, especially with the long weekend coming up next week they'll get alot busier.

Anyway, to my knowledge you can go to:

- Tuggeranong Tyres (used to be Tyre power)

Go early, especially with the long weekend coming up next week they'll get alot busier.

Ditto for Tuggeranong Tyres, Johnno does ours inc slicks (we don't have 18's though) - they are a good bunch to deal with

and

Ditto in getting in early

Thanks for all the awesome replies guys! Hate getting myself into a pickle, especially if my brother finds out that I wasn't prepared for his wedding...

I needed a place in Fyshwick so my Dad is able to drop the rims and tyres off whilst he's at work, and the only place open at 7:30am was Jax QuickFit. I spoke to the guy and apologised for being so early and flustered, told him that we were unable to fit them ourselves (first time defeated by a tyre :D). He said he's been able to fit heaps of 24"+ tyres and rims so I have left it in his hands.

He said he'll be able to have them done by lunch time today which will work out well.

MICK, FEDERAL SIDEWALLS ARE DAMN STIFF AND STRONG!!!

YAY!!! Thanks again for everyones advice. Its all sorted. Big thanks to Jax QuickFit in Fyshwick for doing an awesome quick job.

Mick, i'll let you know how i go with the tyres. I think 255s on the rear might have been a better option for the guards sake, but i'll just have to go get them rolled.

lol Sounds like you had fun... :P

Youre right though, the sidewalls in the 595's are strong, Im glad you got it sorted though.

Im sure that you'll love the amount of grip they'll give you.

If you get your guards rolled you shouldnt have any issues running 265/35R18's on an R33 (depending on wheel offset).

Post some piccies of the new bling when you get some :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...