Jump to content
SAU Community

Recommended Posts

So anyways....thought i had a slow leak, turned out it was a crack in my rim.

Getting the rim fixed, but noticed that the camber wear on my tyre is so much that it it's now not exactly legal. Now given that my rim repair is going to be around $130, and I'm broke, i just need the tyre put back on for the next two weeks til i get paid and can think about replacing the tyre (which has about 11mm of tread everywhere except the inside 15mm of the tyre).

So does anyone know of a smaller tyre place close to the city that would just put the tyre back on for me? Or do you think a normal tyre place would put it back on for me if i said i was just taking it to the track or something?

dodgey i know, but i really can't afford new tyres at the moment!!

Link to comment
https://www.sau.com.au/forums/topic/210201-tyre-fitting-for-not-so-legal-tyres/
Share on other sites

You could try taking the wheel and tyre in separately and asking them to fit it, I dunno whether they'd make you sign a disclaimer or something but they might do it. I've had tyres fitted before that were going to the track on the back of a drift car, I think they just noted on the invoice that the tyres were not legal for street use or something like that. You'll still have an illegal/defectable tyre and a cracked rim though, so it's not ideal, and certainly not something I'd do myself.

A better option would be to try to find someone who will loan you a rim/tyre or a pair/set (especially if the sizes are different) that's legal - that way you'll have some grip, and won't have insurance hassles should you run into someone or crash. What size do you have?

Use a tyre lever and squeeze it back on. Theyre just like a bike tyre but tougher

Use a peice of timber to brace against so u dont destroy your rim

Or just buy a 30$ retread or even chuck your spare on

hmm, well, i'm getting the crack in the rim repaired, so that should be an issue - but like i said, that's gonna cost around $130 i'm guessing, and at the moment (not for another 2 weeks at least), i don't have spare cash for tyres.

yeah i should have rotated the tyres at some stage - didn't realise i had that much camber on the front though :blink: and i can only rotate the fronts as i've got 8.5"s on the front and 9.5"s on the rear.

I think i'll just take the other rim off the front - put the two stockers on the front - go to the tyre shop (when i get my cracked rim fixed) and ask them to rotate the two as they are spares or for the track or something - that way they won't be fitting them to the car and they can write whatever they want on the invoice.

THEN.... i'll go buy some cheap 2nd hand tyres or something like the cheapskate that i am :D

oh and size... i'll have to get back to you, i don't even know off hand :blink:

i bought my rims with the stretched rubber already on them and I'm not really partial to it - get way to much understeer at times (which is probably largely due to my completely stock (i.e. f*cken sloppy) suspension.

So you got stock rims with legal tyres on them?

Don't mean to sound stupid, but why not just leave them on the car for 2 weeks. In that 2 weeks you could get a defect, crash the car and have void insurance, etc etc.

So you got stock rims with legal tyres on them?

Don't mean to sound stupid, but why not just leave them on the car for 2 weeks. In that 2 weeks you could get a defect, crash the car and have void insurance, etc etc.

ummm, i think that's what i meant when i said "think i'll just take the other rim off the front - put the two stockers on the front"...

^^ um, i'm not sure how you figure that. i started the thread as a couple of tyre places i went to didn't want to fit non-legal rubber to a rim while it's not on the car, so i was asking for any knowledge of places that would - for example if they didn't mind fitting non-legal rubber if it was for drfit/track. but your input has been super-valuable thus far :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...