Jump to content
SAU Community

Garrett Gt2860r -5, Gt2860r -7, Gt3071r Turbos


Recommended Posts

Hi guys,

recently i managed to get a good deal with a supplier in USA to get good prices with Garrett turbos. For now, i have confirmed deals for Garrett GT2860 - 5 and Garrett GT2860 - 7 turbos for RB26DETT engines.

Price for 2 X GT2860R - 5 will be AUD$2,150 delivered

Price for 2 X GT2860R - 7 will be AUD$2,150 delivered

Price for 1 X GT3071R (T3 Flange) will be AUD$1,500 delivered

gt2860r7071605part1yx5.th.gif20080305lara0103080036ji8.th.jpg

Delivery time will be 6 - 12 days after payment has been cleared

Supplier Details : PSI Parts

159 Ivyhurst rd

Amherst,NY,14226

Prices for just a single turbos or turbos for other engines, please PM me and i will contact the supplier.

Duration of the group buy will be for 2 months. Ending on 15th May. After that, depending on the demand, we may organize another buy again.

Please note, all money transactions will go directly to the supplier, i am not making any extra money through this.

Interested parties please PM me for details of payment and delivery.

Items comes with 12 months Garrett warranty on manufacturing defects.

Admins and Mods, please let me know if there is any other information you require from me for this group buy to proceed according to SAU forum rules.

Thank you.

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

hey there

this looks awesome, as im looking at getting turbos for my gtr

so if i deposit modey now i get them in 6-12 days or do i get them in may??

do they come with any type of warranty etc??

hey there

this looks awesome, as im looking at getting turbos for my gtr

so if i deposit modey now i get them in 6-12 days or do i get them in may??

do they come with any type of warranty etc??

Hey,

If you pay now, you will get them after 6 - 12 days once payment is clear.

I will check with the supplier regarding the garrett warranty.

do these come with anything else, other than just the turbos

as, im aware the HKS kits come with oil lines, gaskets etc...

but they are more pricey

Unfortunately they just come with the turbos just the same if you buy them from hi octane racing or Croydon racing.

Yes the HKS GTSS kits come with the oil lines etc.

Got a reply from the supplier.

The turbo comes with a 12 month warranty. It can be claimed through the Australian Garrett distributors or sent back to the states either way.

BlitzR33 - Sorry you have to get the gaskets yourself. However, these turbos will bolt on to the standard ones.

I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

Guest Rotary20B
I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

I'm in the same position, was going to get a GCG high flow but now leaning this way

Guys, if i'm not wrong, the GT3071r will produced much more power than the GCG highflow. It is similiar size to the HKS 2835 but i'm not sure on that. But it is cheaper than the high flow which GCG charges $1,950.

If you want, go to the Garrett webpage and they'll show the sizes of the turbo.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...