Jump to content
SAU Community

Garrett Gt2860r -5, Gt2860r -7, Gt3071r Turbos


Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

Hey, didn't see it posted so I just wanted to clarify.. Looking at a 3071r, is $1500 delivered not including customs duty and GST?

$1,500 delivered is all you pay. Items above $2,000 then you start worrying about customs duty.

Might be interested in

2 X GT2860R - 5 will be AUD$2,150 delivered

How much for fittings and plumbings for this?

I wouldn't have a clue how much they will cost. They will come with actuators.

Installing the turbo will probably cost about $500 minimum.

Hi sloutch,

Sorry i may not have structured my question properly... I am aware that installation of the turbos would cost approx $500 although i was wondering if my mechanic should order these parts himself at an additional charge OR if i should source the rest of the kit for him? Cheers

I just need to clarify this point before i buy them thats all ;)

Hi sloutch,

Sorry i may not have structured my question properly... I am aware that installation of the turbos would cost approx $500 although i was wondering if my mechanic should order these parts himself at an additional charge OR if i should source the rest of the kit for him? Cheers

I just need to clarify this point before i buy them thats all :P

You can source these parts yourself if you like. But if you don't want to spend time searching for them, i'm sure your mechanic has his own suppliar to get the parts for the turbo. It's all up to you.

Hi i'm after 2 X GT2860R - 7 turbos.

Is this group buy still available? Will there be any cost on top of the $2150?

Cheers

Yes it is still available, please PM me for further details.

  • 2 months later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...