Jump to content
SAU Community

Recommended Posts

If it's remotely relevant my old rb26 with 0.82 gt35 was making ~400rwkw with egt's (as measured approx 1" from the head) between 870-890degC on all cylinders after applying some pretty big corrections.

By comparison a friends rb with a t04z making a fair bit more power had egt's ranging between 860 and 910deg (a lot less work put into trimming individual cylinders). Both cars on pump 98.

Edited by DCIEVE

I think you'll find Nathan's is still a 2.6L, he will join the cool kids with the 3L's soon enough I hope

I was thinking of doing a freshen up over christmas too. maybe its time.

If it's remotely relevant my old rb26 with 0.82 gt35 was making ~400rwkw with egt's (as measured approx 1" from the head) between 870-890degC on all cylinders after applying some pretty big corrections.

By comparison a friends rb with a t04z making a fair bit more power had egt's ranging between 860 and 910deg (a lot less work put into trimming individual cylinders). Both cars on pump 98.

Thats a good result from pump 98.

Drove it to the exhaust shop today, what a feeling it was.

At full noise the exhaust sounds almost stock! Driving around in traffic its a bit louder.

Could be registered next week :)

Drove it to the exhaust shop today, what a feeling it was.

At full noise the exhaust sounds almost stock! Driving around in traffic its a bit louder.

Could be registered next week :)

any DB measurements or sound samples?

  • 5 months later...

Been a quite hectic last couple of months, thinking I had plenty of time to get ready for Powecruise things went a bit pear shaped after the initial run it.

More later....

Waddya tryin to build up the suspense Dave, spill it already ya beeaartch. :action-smiley-069:

Noel,

I literally need 30 mins to type the never ending saga which is my relationship with this car over the last few months.

Short hand is:

Run in.

Noisy engine bay.

Weird fragments in sump and oil

Engine out

Oil pump rebuilt

Stripped and inspected bottom end

New clutch

New harmonic balancer (modified)

New gears and pulleys (modified)

New thermo fan setup

New complete hot side :)

and a $40 alternator lol

Noel,

I literally need 30 mins to type the never ending saga which is my relationship with this car over the last few months.

Short hand is:

Run in.

Noisy engine bay.

Weird fragments in sump and oil

Engine out

Oil pump rebuilt

Stripped and inspected bottom end

New clutch

New harmonic balancer (modified)

New gears and pulleys (modified)

New thermo fan setup

New complete hot side :)

and a $40 alternator lol

sounds normal to me Dave. :rofl:

We sorted the last major issue today which brought a smile to my face, then one of the oil cooler fittings WELDED to the cooler decided to explode. So off to Earls in the morning to see if I can get a new cooler under warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...